Instructions / Assembly

15
1
1
3
10
JJ
HH
x2x2
x2
x2
x2
CC
AA
AA
Attach truss bracket (Y) to end of one truss leg (AA) with
1" hex head cap screw (II) and nut (JJ).
Repeat for second truss leg (AA).
Attach truss cross beam (CC) to two truss legs (AA)
using two hex head cap screws (HH) and two nuts (JJ).
Stand truss and check cross beam is level.
1
3
2
9
Y
AA
AA
II
JJ
x2
x2
x2
Truss Pre-Assembly
1
3
1
2
11
Z
AA
HH
JJ
Place side adaptor bracket (Z) at end of left truss leg
(AA). Secure adaptor bracket with one 2" hex head cap
screw (HH) and one nut (JJ).
Note: DO NOT over tighten side adaptor bracket (Z) onto
end of truss legs (AA). This makes roof assembly difficult.
1
Z
3
1
2
HH
JJ
12
AA
Place window truss tie down (Z) at end of right truss leg
(AA). Secure truss tie down with one 2" hex head cap
screw (HH) and one nut (JJ).
Note: DO NOT over tighten truss tie down (Z) onto end
of truss legs (AA). This makes roof assembly difficult.