Instructions / Assembly

Critical: When installing corners,
flex corner hinges back and forth
several times. This will help provide
a square corner and ensure proper
fit of remaining panels.
Important: DO NOT flex in reverse
position, as this can crack the panel.
16
Shed Assembly/Walls
13
Align tab on bottom right side of left front (C) with slot
on front floor (A). Lower panel into slot and lock in place
by sliding panel toward door opening.
Note: Use a rubber mallet to “push” left front
corner (C) into locked position.
1
2
14
A
LL
B
x6
1
2
15
C
A
Push front floor (A) and rear floor (B) panels together
and secure with six screws (LL).
Note: Refer to pages 10 and 11 to secure floors to
foundation.