Instructions / Assembly

Shed Assembly/Walls (continued)

Secure side panel with four easy bolts (GG), working

from ﬂoor to roof. DO NOT use torque wrench. Use easy

bolt easy driver (XX) and hand tighten. Easy bolt head

will be ﬂush when fully seated. DO NOT over tighten

easy bolts.

Note: You may hear a click when easy bolt has been

tightened completely.

Align tabs on bottom of side panel (D) with slots along

front and rear ﬂoors. Lower panel into slots and lock in

place by sliding panel toward front corner.

Note: Use a rubber mallet to “push” side

panel (D) into locked position.