Instructions / Assembly

21
Shed Assembly/Headers and Truss (continued)
1
3
2
26
JJ
HH
U
Raise ridge beam (U) up and into rear roof ridge beam
bracket. Secure with one 2" hex head cap screw (HH)
and one nut (JJ).
Note: Alignment of ridge beam to bracket may require
header panels to be pushed inwards or outwards slightly
as ridge beam is slid into place.
CAUTION! Part (U) orientation is critical, see
picture.
3
2
27
JJ
U
HH
Slide ridge beam (U) into front roof ridge beam bracket.
Secure with one 2" hex head cap screw (HH) and one
nut (JJ).
Note: Alignment of ridge beam to bracket may require
header panels to be pushed inwards or outwards slightly
as ridge beam is slid into place.
KK
28
Attach the roof truss assembly to the ridge beam with
two screws (KK).
1
2
x2
29
LL
DD
Z
AA
Attach truss strap (DD) to left truss tie down (Z) and
truss leg (AA). Secure with two screws (LL).
Repeat for right side of truss.