User's Manual

36
DATE AND TIME
If you have subscribed to a Caller Line Identification (Caller ID) service, the date and time is
set when the first incoming call is received.You can also manually set the time and date.
Set the date and time
(1) Press Menu, scroll to Clock & Alarm and press Select.
(2) Press Select to choose Date & Time.
(3) Enter the date (DD/MM/YY) then time (HH:MM) in 24-hour format, eg. 7.30pm is 1930.
Press Clear if you make a mistake.
(4) Press Save then Back to return to standby mode.
If you have more than one handset, you only need to set the time and date on one handset.
The other handsets are updated automatically.
Set time format
Select the desired clock format, (12 or 24 hours).
(1) Press Menu, scroll to Clock & Alarm and press Select.
(2) Scroll down to Time Format and press Select.
(3) Scroll to 12 hour or 24 hour and press Select.
(4) Press Back to return to standby.
If you have more than one handset, you can set a different time format for each.