User's Manual

44
Set the redial number length
This feature sets the length of numbers stored in the redial list.The maximum length is 32 digits.
(1) Press Menu, then scroll down to Settings and press Select.
(2) Press Select to choose Set Handset.
(3) Scroll to Redial Length and press Select.
(4) Scroll to Long or Short.
(5) Press Select to confirm.
(6) Press Back to return to standby.
Set the PBX/switchboard access code
If your phone is connected to a PBX/switchboard you may have to dial a number – e.g. 9 – in
order get an outside line.You can set this number so that your phone dials it automatically
before each number in the phonebook and Useful Numbers lists. You can set an access code
and switch the function on or off.
(1) Press Menu, then scroll down to Settings and press Select.
(2) Scroll down to Set Handset and press Select.
(3) Scroll to PBX Access Code and press Select.
(4) Scroll to Off, On or Set Code and press Select.
(5) If you choose Set Code, enter the access code and press Save, you can now use
to switch the code On or Off.
(6) Press Select.
(7) Press Back to return to standby.