User's Manual

46
Set the recall mode
The key is used with certain network services and PBX/switchboard services. You will
not normally need to change this setting unless advised to do so.
(1) Press Menu, then scroll down to Settings and press Select.
(2) Scroll down to Set Base and press Select.
(3) Scroll to Recall Mode and press Select.
(4) Scroll to Recall or Recall 2.
(5) Press Select to confirm.
(6) Press Back to return to standby.
Set first ring
When this function is set to Off, the first ring from a voice call will not sound.This is particu-
larly useful in countries where caller identity (Caller ID) is sent after the first ring, the phone
would not ring without displaying Caller ID information.
(1) Press Menu, then scroll down to Settings and press Select.
(2) Scroll down to Set Base and press Select.
(3) Scroll to First Ring and press Select.
(4) Scroll to choose On or Off.
(5) Press Select to confirm.
(6) Press Back to return to standby.