User's Manual

52
TROUBLESHOOTING
Problem
The icon is not blinking when the handset is placed on the base
• Bad battery contact – move the handset slightly
• Dirty contact - Clean the battery contact with a cloth moistened with alcohol
• Battery is full – no need to charge
No dialling tone
• No power – check the connections. Reset the phone: unplug and plug back in the main
power connector
• Batteries are empty - charge the batteries for at least 24 hours
• You are too far from the base station - move closer to the base station
• Wrong line cable - use the line cable provided
• Line adapter (when needed) is not connected to the line cord – connect the line adapter
(when needed) to the line cord
Poor audio quality
• The base station is too close to electrical appliances, reinforced concrete walls or metal
door frames - move the base station at least 3 feet away from any electrical appliances