User's Manual

BATTERY INDICATIONS
Menu Contact
Handset 1
G0
Battery is fully charged
Battery is partially charged
Battery is running low
Battery is almost discharged
VOLUME INDICATIONS
Mute Contact
Handset 1
G1
Volume 5
G2 Save Back
Ringer Volume
Ringer Off
Name Contact
Handset 1
G3
1. Volume bars are presented whenever the in-call, receiver,
or ringer volume is changed (see screen G1 and G2).
2. When changing your receiver volume during call, the first
press of the up or down navigation button presents the
volume bar on the display showing the current setting.
Subsequent presses change the setting. When the
minimum or maximum setting is displayed, further presses
of the relevant navigation button are ignored.
3. When the handset ringer volume is set to off - the display
prompts "Ringer Off" (see screen G2) and the ringer off
icon is displayed on the dashboard when the display
returns to the idle screen (see screen G3).
4. When the base ringer volume is set to off - the display
prompts "Ringer Off" (see screen G2) but there will be no
indication on the idle screen.
DISPLAY CHARACTERISTICS
Long press during on-hook
will dial number stored.
LEDS
In Use / Ringing / Events
(Events: Missed Calls, SMS
Note: Missed Calls can be
LED INDICATORS
LED State
VMWI, TAM Messages)
disabled
Handset
In Use
* Same constant flashing rate for all events
TAM
HS on cradle
HS off cradle
- Steady ON
Ringing - Flashing*
Events - Flashing*
Base
Power /In Use / Ringing /
Events
Note: Missed Calls and TAM
Messages can be disabled
In Use - Flashing*
Ringing - Flashing*
Events - Flashing*
Power - Steady On
Answer On - Steady ON
New Messages - Flashing*
Charging - Steady ON
- OFF
Handset Display
1.4 inch
128*128 pixels
4K colour
5 lines + 1 line softkeys + 1 line dashboard
Copy 10_65
At least 16
Display Size
Display Resolution
Colour
Number of Rows
Font Package
Characters (per rows)
HOT KEYS
ON-HOOK OFF-HOOK ACTIONS
Case 1
will dial 1.
will dial number stored.
Long/short press during calls
Case 2
also dial the number stored.
Subsequent long presses will
Long press during off-hook
Note: A long press on KEY_1, 2 and 3 is dialled out in off or on hook
mode or both can be definded in EEPROM.
Long presses will dial the
Case 3
mode it is in.
number stored whichever
OUT OF RANGE
1. When a handset is out of range - the handset name and
number is replaced by "Searching ..." (see screen G4).
2. In addition to "Searching ..." the range icon on the
dashboard (if the range icon is enabled) will flash along
with an out of range / warning tone.
3. When a handset is out of range - the user can access the
handset Contact list, and functions local to the handset
(Calls List, Set Handset, Clock & Alarm, Reminders, Useful
Numbers and Registration).
If the user tries to access something that is resident on
the base (Set Base, Answering Machine, Text Messaging),
the display will prompt "Not available" for 2 seconds along
with the error tone and returns to the previous screen.
Menu ContactG4
Searching ...