User's Manual

De-register Handset
Y25
KEY_SOFT_1
Menu Contact
Handset 1
KEY_UP
<< Icon >>
Select Back
Registration
Y26
KEY_SOFT_1
Select Back
Register Handset
Registration
Select Base
KEY_DOWN
Y27
De-register
Y28
Select Back
Register Handset
Registration
Select Base
KEY_SOFT_1
De-register
Y29
OK Back
De-register
Enter System PIN:
Y30 OK Clear
De-register
Enter System PIN:
****
KEY_SOFT_1
Yes No
De-register
Y33
REGISTRATION (cont.)
De-register
Y36
KEY_SOFT_1
Incorrect
System PIN !
De-register
Handset 4 ?
Select Back
Handset 2
De-register
Handset 3
Handset 4
Y31
KEY_SOFT_1
Select Back
Handset 2
De-register
Handset 3
Handset 4
Y32
KEY_SOFT_1
KEY_SOFT_1
De-register
Y34
Handset 4
De-registered
Y35
Go to Y28
1. P ress and hold down KEY_PAGE for 3 seconds to put the base in subscription mode, the
subscription period is offered for 1 minute. The Power In Use / Event LED on the base flashes
for the duration of the registration period.
2. When registering a handset - all base numbers are presented on the select base screen (see
screen Y3 and Y12).
" (In Use)" is appended to the base number currently in use.
3. If user select a base already in use - the display prompts "Replace Base X ?" where X is the
base number (see screen Y13) and the registration is overwritten with the new one.
4. When an additional handset is first powered up, "Please register" is flashing on the display in
place of the handset name and number (see screen Y0). The range icon (if enabled) also
flashes.
5. If registration process failed (e.g, if wrong system PIN was entered) - the display prompts
" Registration Unsuccessful !" along with a warning tone and returns to the idle screen (see
screen Y14).
6. If there are already 5 handsets registered to the base, the registration will fail and the display
will prompt "Registration Unsuccessful !" along with a warning tone and returns to the idle
screen (see screen Y14).
7. When de-registering a handset - all registered handsets accept the one being used are offered
(see screen Y31).
8. When de-registering a handset if wrong system PIN is entered - the display prompts "Incorrect
System PIN !" along with an error tone and return to "Enter System PIN" screen so the user
can retry.
9. To stop the registration process at any time press Back (KEY_SOFT_2) or KEY_END.
10 . When a handset is unregistered - the user can access the handset Contact list, and functions
local to the handset (Calls List, Set Handset, Clock & Alarm, Reminders, Useful Numbers and
Registration).
11 . If any of the handsets are registered to another manufacturers or non compatible base, any
attempt to access functionality which is not local to the handset will result in the "Not
Available" error message being presented.