User's Manual

If you press a key (0 - 9) during the conversation, the communication duration is not reset to zero and
reappears after 15 seconds. At the end of each call, the duration of communication and the handset
name are displayed alternately for 5 seconds.
3.2.8 Mute
It is possible to mute the microphone during a conversation.
Press KEY_CLEAR/KEY_MUTE during the conversation, the microphone is then deactivated, the
external correspondent is put on hold; you can talk freely without being heard by the calling party.
“MUTE” is displayed.
No digit key or KEY_INT can be used during mute.
And Phonebook can be reviewed but can’t be dialled out during mute.
Press KEY_CLEAR/KEY_MUTE again to return to normal mode.
3.2.9 Changing Earpiece Volume during Call
It is possible to change earpiece volume during a call using KEY_UP/CLIP and KEY_DOWN/CLIP.
The earpiece volume will be displayed as “EARVOL n” (1<=n<=5) during 8 s unless a key digit
(KEY_0 to 9 + KEY_HASH + KEY_STAR) is pressed.
3.3 Direct access memory
The product has two locations of direct access memory dial number. The number is pre-programmed
to the EEPROM and user cannot change it. The maximum digits for each location are 16 digits and
there is no name for this direct access dial number.
3.3.1 How to access the direct memory dial number during idle
User press and hold the KEY_1 or KEY_2 for more than 1.5 second (Long press),
then the unit
display pre-programmed number on the LCD and dial it out.
KEY_1 for location number 1 and KEY_2
for location number 2.
3.3.2 During OFF HOOK
When the unit is on OFF HOOK mode, it is only allowed to access direct access memory number
when the first key in is long press for KEY_1 or KEY_2.
3.4 Redial feature
3.4.1 Redial list
Up to 10 last redial numbers (32 digits) are stored in the redial list (in PP EEPROM).
The last calls appear with their name if they are stored in the phonebook.
To retrieve the entries:
Press KEY_LNR If the list is already empty, then “empty” is displayed
• Scroll through the calls with the up KEY_UP/CLIP and down KEY_DOWN/CLIP arrows.
The phonebook name is displayed if it exists. Otherwise it displays the first 12 digits of the
number.
• Press KEY_OK to toggle between name and number,
• Press KEY_MEM/EXIT return to standby mode
To dial out number just simple press KEY_HOOK
.
3.4.2 Dial out redial after OFF HOOK
To recall the last redial entry, just take the line by
KEY_HOOK
and press KEY_LNR to dial.
8 of 25