User's Manual

Getting Started
11
R0
Getting Started
Location
You need to place your WDCT45-A2 within 6
feet of the AC power outlet and telephone
socket so that the cables will reach.
Make sure it is at least 3 feet away from
other electrical appliances to avoid
interference issues.
Make sure it is at least 3 feet away from
metal appliances to avoid interference
issues.
Your WDCT45-A2 works by sending radio
signals between the handset and base. The
strength of the signal depends on where you
locate the base. Putting it as high as
possible and separated as much as possible
from other radio devices and metal objects
ensures the best signal.
WARNING
Do not place your WDCT45-A2
in the bathroom or other
humid areas.
Handset range
The WDCT45-A2 range between
the base and handset will
vary greatly depending on
the location of the base.
When there is no clear line
of sight between the base
and handset, e.g. base
indoors and handset either
indoors or outdoors, the
range will be reduced.
Signal strength
The
symbol on your
handset screen indicates
when you are in range.
When you are out of range,
it flashes.
IMPORTANT
Do not connect the
telephone line until the
handset is fully charged.
The base must be plugged
into the AC power at all
times.