User's Manual

14 Getting Started
R0
Ensure the charger is
connected to the AC power
outlet at all times.
Your Suncorp WDCT Color Display
WDCT45-A2 is now ready for use.
If you have purchased
additional handsets:
On each charger:
1. Connect the mains power adaptor to the
charger and switch on.
On each additional handset:
2. Insert the 2 x AAA NiMH batteries
supplied into the handset, paying
attention to the polarity of each (See
page . Slide the battery compartment
cover into place.
3. Charge the handset for at least 16
hours.
Your additional handset(s) come pre-
registered to the base as Handset 2,
Handset 3, Handset 4 etc and this is shown
on the display.
Your additional handsets are now ready
for use.