User's Manual

46
WDCT45-A2 Time Settings
R0
IMPORTANT
If you have subscribed to
your network’s Caller-ID
service the date and time
will be set automatically
when you receive your first
call and you will not need to
set the date and time
manually, although this is
an option. When the alarm
is switched on, the normal
standby icon shows the
icon instead.
24 HOUR TIME FORMAT
Information
When entering a time into
the WDCT45-A2 you must use 4-
digit, 24 hour time
formatting. For example to
set the time to 9:30 am, you
would enter 0
9 3 0. To
enter a time of 9:30 pm, you
would enter 2
1 3 0.
Time Settings
Setting the Date and Time
1. Press Menu then scroll
to Time
Settings and press OK. Press
to highlight Set Date & Time then
press OK.
Set Date
2. Enter the date, e.g.,
for 22
nd
February. Press OK to
confirm.
Set Time
3. To Enter the time for the 12 hour format
2.30 am or pm, press,
then press OK to confirm.
4. To Enter the time for the 24 hour format
2.30pm, press
then press OK to confirm.
5. To Enter the time for the 24 hour format
2.30am, press
then press OK to confirm.
Format Time (12 hr or 24 hr)
1. The time can be displayed as 12 hour or
24 hour format
2. Press Menu then scroll
to Time
Settings and press OK. Press
to highlight Format Time (12 hr/24
hr) then press OK.
3. Highlight 12 hour or 24 hour and
press OK.