User's Manual

Additional Handsets and Bases 49
R0
Register handset with an
additional base
To register the handset with another base:
1. Press Menu then scroll
to
Registration and press OK.
2. Register Handset is highlighted.
Press OK.
3. Scroll
or to select the base.
Press OK.
4. Enter the selected base’s SYSTEM PIN
(original setting 0000). Press OK.
5. At the base: press and hold
until
you hear the base beep. After a few
seconds, the handset screen will show
the base ID number. Press OK to
confirm. The handset screen then
shows Handset Registered. The
handset is now ready for use.
Selecting a Base
To select the base to connect to:
1. 1.Press Menu then scroll
to
Registration and press OK.
2. Scroll
to Select Base then
press OK. The current base being used
is highlighted.
3. Scroll
or to select the base
you want or Automatic to connect to
the base with the strongest signal.
Press OK.
MULTIPLE BASES
Information
A handset registered with
one base can then be
registered with up to three
more bases, e.g. Home
office line, 2
nd
home line,
etc.
You can switch your
WDCT45-A2
handset between bases.
You can also set it to
automatically select the
base with the strongest
signal. The handset must
first be registered with each
base individually.