User's Manual

Using The WDCT45-AS 21
R0
Receiving Calls
To answer a call, press
.
If auto talk (answer) is enabled (default, see
page 39) and the handset is on the base,
simply lift
it up and speak.
Providing you have subscribed to your
network’s Caller-ID service, the caller’s
number and name is displayed after the first
ring.
Speakerphone
Speakerphone lets you talk to your caller
without holding the handset to your ear. It
also enables other people in the room to
listen to both sides of your conversation.
Making a speakerphone call
1. Press
(i.e., press 2 times for
speakerphone mode). Dial the number.
Your call can be heard over the
handset’s loudspeaker.
2. To switch back to the handset at any
time, press
again (i.e.,
toggles
between handset and speakerphone
mode).
3. Press
to end the call.
Adjust handset / speakerphone
volume
During a speakerphone call, press or
to select volume 1(low) to 5 (high).
You can switch to
speakerphone mode at any
time during a call. Just
press
.
When in speakerphone
mode, press
to switch
back to handset mode.
When in speakerphone
mode, the display shows
the
icon.