User's Manual

44 WDCT45-A2 Call Lists
R0
FORMATTING A NUMBER
TO DIAL
Information
See page 40 for information
about setting Area Codes
for the WDCT45-A2. If you
want to call a highlighted entry
when viewing a Call List,
press
to have the
number to be dialed
displayed. Due to the Area
Codes or some other
reason, the actual digits
needed to be dialed may no
be displayed. You can
format the number to be
either:
• 7-Digits (7-digit number
only)
• 10-Digits (Area-Code+
Number)
• 11-Digits (1+Area-
Code+Number)
To change the format of the
number press
or to
change from 7 - 10 - 11 digit
formatting. When the
format is correct press
to dial.
Formatting changes may
not be possible if the
number was received from
the network marked as
"correct digits to dial" or if
the number was not
received with 10 digits.
Another Way To Access The Call
Lists
To access the Missed or Dialed Calls Lists
using the navigator button:
From the standby screen:
1. Press
for the Missed Calls List
OR
2. Press
for the Dialed (outgoing)
Calls List
Dial A Selected Entry
Press or
to scroll through the list.
Press
to display the number to dial then
press
or
to format the number with 7,
10, or 11 digits if a change in format is
necessary. Press
again to dial the
displayed number.
Call Lists Options
Select Options from any Call List to:
Delete – to delete the list entry.
Show Details – if a name is displayed,
this shows the number.
Save Number – to create an entry in the
phonebook.
Enter the name, press OK. The number is
displayed. Press OK to store the number.