Use And Care Manual

ONE YEAR LIMITED WARRANTY

WARRANTY FOR FLUSH FIT REGISTER BOOSTER™

Menards_warranty_temp-0918

SUNCOURT INC.

500 W. SECOND AVENUE • P.O. BOX 40

DURANT, IOWA 52747-0040

1-800-999-FANS (3267)

CLEANING AND MAINTENANCE

USE AND CARE FOR FLUSH FIT REGISTER BOOSTER™

Menards_warranty_temp-0918

SUNCOURT INC.

500 W. SECOND AVENUE • P.O. BOX 40

DURANT, IOWA 52747-0040

1-800-999-FANS (3267)

Before cleaning the Flush Fit Register Booster™ disconnect the power cord from the outlet. Dust may be

removed from the exterior surfaces using a soft cloth, the round brush attachment of your vacuum

cleaner, or a cloth that has been lightly moistened with water and a mild, non-abrasive detergent. Dust

accumulation in the interior of the unit may be removed by using the small round brush attachment of

your vacuum cleaner. Accumulation of dust in the interior will be minimized by regular replacement of your

furnace filter as recommended by the manufacturer.

Subject to the following limitations, Suncourt Inc. (manufacturer) warrants that the Flush Fit Register

Booster™ will, for 1 (one) year from date of original retail purchase, but not exceeding 2 (two) years from

date of manufacture, remain free from appearance of defects in workmanship or materials. This warranty

is subject to the following limitations: (a) manufacturer’s liability is limited to the replacement or repair of

the unit, as decided by the manufacturer; (b) a defective unit must be returned, prepaid, with proof of

purchase, well packaged to avoid damage in transit; and (c) this warranty does not apply to defects

resulting from the alteration, abuse, accidental damage, unauthorized repair, or misuse of the unit. This

warranty is given in lieu of all other warranties, guarantees, and conditions on manufacturer’s part, and

the manufacturer shall have no tortious or other liability in respect to this Flush Fit Register Booster™.

Ship unit to Suncourt Inc. only after obtaining a Return Goods Authorization (RGA) number. Returns

without this RGA number will not be accepted. Actual product appearance may differ from illustrations.

Suncourt reserves the right to modify any or all of its products' features, designs, components and speci-

fications without notice.

PAGE 1
USE AND CARE FOR FLUSH FIT REGISTER BOOSTER™ CLEANING AND MAINTENANCE Before cleaning the Flush Fit Register Booster™ disconnect the power cord from the outlet. Dust may be removed from the exterior surfaces using a soft cloth, the round brush attachment of your vacuum cleaner, or a cloth that has been lightly moistened with water and a mild, non-abrasive detergent. Dust accumulation in the interior of the unit may be removed by using the small round brush attachment of your vacuum cleaner.