Manualshelf

User Guide

ManualsBrandsSUNELL ManualsNetwork CameraSUNELL SN-IPR8080CBAA-Z IR Bullet AI Network Camera
12
Table Of Contents
Step 3 Turn on the camera, connect the monitor, adjust the
camera screen to the corresponding area. if user
need to adjust the position of the camera, he can
loosen the two-axis screws on bracket to manually
adjust the position. Then tighten the screws after
finishing adjustment, as shown in figure 3-2.
Step3 Click Login, the main page is displayed.
4.2 Modify IP address
Choose Configuration > Device > Local Network, the Local
Network page is displayed.
Input the IP address in the IP Address box and click Apply as
shown in figure 4-2.
After the IP address is set successfully, please use the new IP
address to login the Web interface.
Figure 4-2 Local Network
4.3 Browsing Video
To ensure the real-time video can be played properly, you must
perform the following operation when you login the web for the first
time. If you can view the video immediately, please ignore it.
Step 3 Download and install the player control as prompted.
If the repair tips displayed when installing the control, please
ignore the prompt, and continue the installation, close the
Web page during installing. Then login the page again.
Step 1 The Internet Explorer. Choose Tools > Internet options >
Security > Trusted sites > Sites, in the display dialog box,
click Add, as shown in figure 4-3.
Step 2 In the Internet Explorer, choose Tool > Internet Options >
Security > Customer level, and set Download unsigned
ActiveX control and initialize and script ActiveX
controls not marked as safe for scripting under ActiveX
controls and plug-ins to enable, as shown in figure 4-4.
To browse a real-time video, login the device and click Live
Video. The Live Video page is displayed, as shown in figure
4-5.
User Name
Password
English
Figure 4-1 Login
Figure 4-5 Live Video
Figure 4-4 Configuring ActiveX control and plug-ins
Local Network
IP Protocol
DHCP
IP Address
Subnet Mask
Default Gateway
Preferred DNS Server
Alternate DNS Server
MTU(800-1500)
Refresh
Apply
192.168.0 .1 20
192.168.0 .1
4.1 Login
Step 1 Open the Internet Explorer, enter the IP address of IP
camera (the default value: 192.168.0.120) in the address
box, and press Enter. The login page is displayed. as
shown in figure 4-1 .
Step 2 Input the user name and password.
Quick Configuration(e.g IE)
The default user name and password are both admin. Change the
password when you login the system for the first time to ensure
system security.
You can change the system display language on the login page.
4
Figure 3-2 Finish installation
NOTE
NOTE
Figure 3-1 Installing bracket
The Bullet Network Camera can be installed on the ceiling
or wall. You can select an installation mode based on site
requirements. If the camera is installed on a concrete wall,
install the expansion bolts before installing the bracket. If the
camera is installed on a wooden wall, use self-tapping
screws to install the bracket directly.
NOTE
Figure 4-3 Adding a trusted site
3
Device Installation
NOTE
During installation, please take care of the waterproofness of
the bracket and line. Please make sure the head of line bend
down then go upward, avoid the water go along the line into
the bracket.
The wall where the support is mounted must be able to
withstand at least three times of the total weight of the support
and the camera.
You can route cables from the top or from the side. If you use the top
routing method, drill a hole in the surface first. If you use the side
routing method, please route the multi-head cable out from the side
gap at the bottom of the camera.
Installation Steps:
Step 1 Stick the Installation location sticker on the ceiling or
wall, drill four holes based on the marks on the
sticker. Drive the plastic anchors into the holes,
Install the camera on the ceiling or wall, and fix the
screws as shown in figure 3-1.
Step 2 Connect the multi-connector cable.
Live Vide o
Playback
Personnel Cou nt
Configurati on
Not e: Activ eX is bei ng used t o play li ve vide o now
Swi tch to VL C, then p lay the v ideo
Swi tch to Pl ugin, t hen pla y the vid eo
Strea m
str eam 1
1
2
Live Vide o
Playback
Personnel Cou nt
Configurati on
Not e: Activ eX is bei ng used t o play li ve vide o now
Swi tch to VL C, then p lay the v ideo
Swi tch to Pl ugin, t hen pla y the vid eo
Strea m
str eam 1
1
2
http:// 19 2.168.0.1 20
1 Personnel Count: User can query the data of personnel count,
through year, month, day. The statistics can be downloaded. The
data can be shown by line chart, histogram, list.
2 AI Live video: Click the icon to view the snapshots of human face
or license plate (click “Face” or “Plate” to switch ).
The bottom page will show the captured images of vehicle and
human .
Parameter
Enable
Sensitivity
Limit Target
Type
Output
Channel
Audio Detect
Alarm
Flashing
Alarm
Alarm Record
SMTP
FTP Upload
Schedule
Table 4-1 Parameters of Intelligent Analysis
Peri meter
Enable
Audio Det ec t Alarm
Sound Alar m Fi le
Flashli gh t Alarm
Sensiti vi ty
Limit Target Ty pe
Output Ch an nel
Alarm Rec or d
Clear
Refresh
Apply
Sun
Sat
Fri
Thu r
Wed
Tue s
Mon
4.4 Set Intelligent Analysis
At “Configuration > Intelligent Analysis ” interface to set the
parameters of intelligent analysis (Perimeter, Single Virtual, Fence,
Double Virtual Fences, Multi Loiter, Converse, Personnel Count), so
that the user can receive the alarm of target, as shown in figure 4-6.
Figure 4-6 Intelligent Analysis - Perimeter
4.5 AI Multi object
At “Configuration > AI Multi object” interface, user can enable face
detection, full body detection, vehicle detection, set the other
parameters of detection, as shown in figure 4-7.
Face Detectio n
Fullbody Dete ction
Vehicle Detect ion
Display Trace In fo
Show Detectio n Area
Confidence Co efficient
Face Pixel Min( 30-300)
Body Pixel Min( 30-300)
Body Pixel Min( 30-300)
Vehicle Pixel Mi n(30-300)
Image Matting Q uality
Snapshot Mode
Upload Image In terval(1-10s)
FTP Uplo ad Image Matting
FTP Uplo ad Whole Image
Algorithms Li brary Version
Figure 4-7 AI Multiobject
NOTE
For better capture performance, it is recommended to use 6mm
focus length lens or above.
Horizontal rotating
360°
Horizontal rotating
360°
Vertical
rotating 80°