User Guide

4.1 Login
Step 1 Open the Internet Explorer, input the IP address of IP camera
(the default value: 192.168.0.120) in the address box, and press
Enter. The login page is displayed as shown in figure 4-1.
Step 2 Input the user name and password.
Ÿ The default user name and password both are admin. Modify the
password when user logs into the system for the first time to ensure
system security.
Ÿ It is advised to restart the device three minutes later after
modifying password to ensure modified successfully.
Ÿ
Ÿ User can change the system display language on the login page.
NOTE
Step3 Click Login icon, the main page is displayed.
4.2 Modify IP address
Choose Configuration > Device > Local Network, the Local Network
page is displayed.
Input the IP address in the IP Address box and click Apply as shown in
figure 4-2.
After the IP address is set successfully, please use the new IP address
to login the Web interface.
User Name
Password
English
Figure 4-1 Login
Quick Configuration(e.g IE)
4
Step 6 Connect the camera to monitor , loosen the screws of
support frame, as shown in figure 3-3. Adjust the three
axes to focus image on monitoring scenarios. Tighten the
screws to finish adjustment.
Step 7 (Arrange the cable of camera to over-line buckle, if the
type of camera is inner-line), then assemble the dome
cover with hex wrench, as shown in figure 3-4.
Figure 3-1 Opening camera
Installation Steps:
Step 1 Stick the Installation location sticker which is in accessory
package on the ceiling or wall. Drill two holes based on the
marks on the sticker. Drive the plastic anchor into the
holes.
Step 2 Use the wrench in the accessory package to unscrew the
four screws on the dome cover. The camera is opened, as
shown in figure 3-1.
The mini dome camera can be installed in the ceiling, wall, wall
bracket or ceiling bracket. This section describes how to install
the camera in the ceiling.
WARNING
To avoid moisture influence, install the dome cover at least
half an hour after the camera is installed and powered on.
3
Device Installation
Plastic anchors
Step 3 Fetch two black self-tapping screws from the accessory
package. Then fix the screws to fasten the camera on the
ceiling as shown in figure 3-2.
Step 4 Connect the network access port and power supply of the
multi-head cable.(the inner -line cameras need to fasten
all lines to correspond terminal as shown in figure 2-1 )
Figure 3-2 Installing camera
NOTE
Ÿ There are two outlet mode of cable, for the top outlet mode, user
should drill the hole at first for threading cable.
Ÿ The side outlet mode that the installation sticker’s gap should
align the outlet rubber stopper.
Figure 3-3 Adjusting lens
slotted
screw
Vertical
rotating 80°
Horizontal
rotating
45°
Lens axis
rotating
350°
Figure 3-4Assembling cover
4.3 Browsing Video
To ensure the real-time video can be played properly, you must perform
the following operation when you login the web for the first time:
Step 2 In the Internet Explorer, choose Tool > Internet Options >
Security > Customer level, and set Download unsigned
ActiveX control and initialize and script ActiveX controls not
marked as safe for scripting under ActiveX controls and
plug-ins to Enable, as shown in figure 4-4.
Step 1 The Internet Explorer. Choose Tools > Internet options >
Security > Trusted sites > Sites, in the display dialog box, click
Add, as shown in figure 4-3.
Figure 4-2 Local Network
Figure 4-3 Adding a trusted site
Figure 4-4 Configuring ActiveX control and plug-in
Step 3 Download and install the player control as prompted.
If the repair tips are displayed when installing the control , please
ignore the prompt, and continue the installation, close the browser
during installing. Then login the page again.
To browse a real-time video, login the device and click Live
Video. The Live Video page is displayed, as shown in figure 4-5.
Figure 4-5 Live Video
NOTE
Local Network
Netw or k Card ID
IP Pro to col
DHCP
IP Add re ss
Subn et Mask
Defa ul t Gateway
Pref er red DNS Serve r
Alte rn ate DNS Serve r
MTU( 12 80-1500)
Refresh
Apply
1
IPv4
192.168.0.120
255.255.255.0
192.168.0.1
192.168.0.1
192.168.0.2
1500
2.2 Camera Dimensions
Figure 2-5 Dimensions of Dome(Unit:mm）
Different devices may have different dimensions; Please refer
to the actual product.
NOTE
63
40.5
99.5
φ4.5
86
99.5
ID
Core
Description
Remark
4
Reset button
Long press the reset button for 5
seconds to restore the original
settings.
5
Power supply
(DC 12V)
Connect to a 12V direct current
(DC) power supply.
Alarm output COM
Applied for
alarm
function
Alarm output terminal
Alarm input COM
Alarm input terminal
6
OUT
IN
G
G
http://192.168.0.120
Live Video
Playba ck
Person ne l Co un t
Config ur at io n
Not e: Activ eX is being u sed t o pla y live vi deo now
Swi tch to VL C, then p la y the v ide o
Swi tch to Pl ugin, t he n pla y the v ide o
Strea m
strea m 1
1
2
1 Personnel Count: User can query the data of personnel count,
through year, month, day. The statistics can be downloaded. The
data can be shown by line chart, histogram, list.
2 AI Live video: Click the icon to view the snapshots of human face
or license plate (click “Face” or “Plate” to switch ).
The bottom page will show the captured images of vehicle and
human face.
4.4 Intelligent Analysis
At "Configuration > Intelligent Analysis" interface, user can set the
parameters of Perimeter, Single Virtual Fence, Double Virtual Fence,
Multi Loiter, Converse and Personnel Count, as shown in figure 4-7 .
Figure 4-7 Intelligent Analysis
Live Video
Playb ack
Perso nne l Co unt
Confi gur at ion
Dev ice Inf o
Str eam
Dev ice
Ext ernal D evice
Int ellig ent Anal ysis
Per imete r
Sin gle Vir tua l Fen ce
Dou ble Vir tua l Fen ces
Mul ti Loit er
Con verse
Per sonne l Count
Ala rm
AI Mu ltiob ject
Dev ice Rec ord
Pri vacy Ma sking
Net work Se rvice
Pri vileg e Manag er
Pro tocol
Dev ice Log
Loc al Conf ig
Mai ntena nce
Per imete r
Ena ble
Sen sitiv ity
Out put Cha nnel
Ala rm Reco rd
SMT P
FTP U plo ad
Cle ar
Ref resh
App ly
Sun
4.5 AI Multi object
At “Configuration > AI Multi object” interface, user can enable face
detection, full body detection, vehicle detection, set the other
parameters of detection, as shown in figure 4-8.
Figure 4-8 AI Multi-object
Face Detect ion
Fullbody De tecti on
Vehicle Dete ction
Display Trac e Info
Show Detect ion Area
Confidenc e Coeffic ient
Face Pixel Mi n(30- 300)
Body Pixel Mi n(30- 300)
Body Pixel Mi n(30- 300)
Vehicle Pixe l Min(3 0-300)
Image Matti ng Qual ity
Snapshot Mo de
Upload Imag e Inter val(1-10s)
FTP Upload Imag e Matti ng
FTP Upload Whol e Image
Algorithm s Libra ry Version
A
B
Pedestrian direction
15°
If user requires higher
accuracy of personnel count,
we recommend the user to
install camera and draw the
line following as figure 4-6.
Figure 4-6 Installation of personnel count
CAUTION
NOTE
For better capture performance, it is recommended to use
6mm focus length lens or above.