Product Manual A

1003AJ 4 rev. 11/13/13

MODEL 1003AJ

CAPACITY: 3 TON

JACK STAND (PAIRS)

PARTS LIST ANd dRAWINg

PREVENTATIVE MAINTENANCE

This is the safety alert symbol used for the PREVENTATIVE MAINTENANCE section of this manual to alert you to potential personal

injury hazards. Obey all instructions to avoid possible injury or death.

1. Always store the jacks stands in a well protected area where they will not be exposed to inclement weather, corrosive vapors,

abrasive dust, or any other harmful elements. The stands must be cleaned of water, snow, sand or grit before using.

2. Every jack stand owner is responsible for keeping the stand labels clean and readable. Use a mild soap solution to wash external

surfaces of the stand. Contact Sunex for a replacement label if your stand's label is not readable.

3. Inspect the stands before each use. Do not use the stands if any component is cracked, broken or bent. Do not use the stand if it

has loose or missing hardware or components, or is modiﬁed in any way. Take corrective action before using the stand again.

Premature wearing or damage to components caused by loose or missing hardware is not

eligible for warranty consideration.

5 6

Note:

Only items identied by part number are available for purchase.

ITEM NO PART NO DESCRIPTION QTY

1 Bolt M8 x 80 1

2 Base 1

3 Sleeve 1

4 Nut M8 1

5 RS3TPRCS Lock Pin (incl. item 6,7) 1

6 Key Ring 2

7 Chain 1

8 Saddle and Post 1

Not Shown RS1003AJLK Label Kit 1