User Manual

ManualsBrandsSunex Tools ManualsEquipment5218

5218 1 rev. 12/31/04

FEATURES

4 Boom Positions with Rated Capacity Indicated

Heavy Duty Slow Release Power Unit

4" Front Leg Clearance

8 Ton Quick Lift Ram

OWNER/USER RESPONSIBILITY:

The owner and/or user must have a thorough understanding

of the manufacturer’s operating instructions and warnings

before using this mobile crane. Personnel involved in the

use and operation of equipment shall be careful, competent,

trained, and qualified in the safe operation of the equipment

and its proper use when servicing motor vehicles and their

components. Warning information should be emphasized

and understood. If the operator is not fluent in English, the

manufacturer’s instructions and warnings shall be read to and

discussed with the operator in the operator’s native language

by the purchaser/owner, making sure that the operator com-

prehends its contents.

Owner and/or user must study and maintain for future

reference the manufacturer’s instructions. Owner and/or user

is responsible for keeping all warning labels and instruction

manuals legible and intact. Replacement labels and literature

are available from the manufacturer.

THIS CRANE IS DESIGNED FOR ENGINE LIFTING PURPOSES ONLY.

WHEN REMOVING ENGINES FROM VEHICLES, BE SURE THAT THE

FRONT OF THE VEHICLE IS NOT JAMMED AGAINST THE

HYDRAULIC UNIT. FAILURE TO OBSERVE THIS WARNING COULD

RESULT IN A DROPPED ENGINE.

A VISUAL INSPECTION SHOULD BE MADE BEFORE EACH USE OF

THE CRANE, CHECKING FOR LEAKING HYDRAULIC FLUID AND

CRACKED, DAMAGED, LOOSE OR MISSING PARTS.

DO NOT OVERLOAD. OVERLOADING CAN CAUSE DAMAGE TO OR

FAILURE OF THE MOBILE CRANE.

LOWER BOOM AND LOAD TO THE LOWEST POSSIBLE POSITION

BEFORE TRANSPORTING.

ASSURE THAT THE LOAD IS NOT ALLOWED TO DROP SUDDENLY

OR SWING DURING TRANSPORTING.

MAKE SURE THAT BOOM IS FULLY LOWERED BEFORE ADDING OIL

TO UNIT RESERVOIR.

THIS MOBILE CRANE IS DESIGNED FOR USE ONLY ON HARD LEVEL

SURFACES CAPABLE OF SUSTAINING THE LOAD. USE ON OTHER

THAN HARD LEVEL SURFACES CAN RESULT IN MOBILE CRANE

INSTABILITY AND POSSIBLE LOSS OF LOAD.

NO ALTERATIONS TO THE MOBILE CRANE SHALL BE MADE. USE

ONLY SLINGS OR CHAINS WITH CAPACITY GREATER THAN THAT

OF THE LOAD BEING LIFTED.

READ, STUDY AND UNDERSTAND THE INSTRUCTION MANUAL

PACKED WITH THIS CRANE BEFORE USING CRANE.

FAILURE TO HEED THESE WARNINGS MAY RESULT IN LOSS OF

LOAD

, DAMAGE TO CRANE, AND/OR FAILURE RESULTING IN

PROPERTY DAMAGE, PERSONAL OR FATAL INJURY.

SPECIFICATIONS:

Pos. 1 Pos. 2 Pos. 3 Pos. 4

Max. Boom Ht. ..........95.25" ........91.25" ........ 87" ............82.5"

Min. Boom Ht. ............... 0" .............5.75" ....... 12.25" .........18.5"

Boom Capacity ..........1/2 Ton .........1 Ton .....1-1/2 Ton .......2 Ton

Boom Ext. From End

to Ram ..................... 50" ............42.5" ........ 35.5" ..........28.5"

Base Dimensions – Open

Width Back ................................................................... 34"

Width Front .............................................................. 35.5"

Length ....................................................................... 69.5"

Base Dimensions – Folded

Width Back ................................................................... 34"

Width Front ................................................................. 24"

Depth ......................................................................... 21.5"

Power Unit .......................... 8 Ton Heavy Duty Quick Lift

Shipping Weight ...................................................210 Lbs.

(Shipped in 2 boxes)

MODEL #5218

4000 LB. CAPACITY

BREAKDOWN ENGINE CRANE

LOW CLEARANCE WITH 8 TON QUICK LIFT RAM

PARTS BREAKDOWN AND OPERATING MANUAL

THIS OPERATING MANUAL CONTAINS

IMPORTANT SAFETY INFORMATION.

READ CAREFULLY AND UNDERSTAND

ALL INFORMATION BEFORE OPERATING

TOOL. SAVE THIS MANUAL FOR FUTURE

USE.

Summary of content (4 pages)

PAGE 1
MODEL #5218 4000 LB. CAPACITY BREAKDOWN ENGINE CRANE LOW CLEARANCE WITH 8 TON QUICK LIFT RAM PARTS BREAKDOWN AND OPERATING MANUAL THIS OPERATING MANUAL CONTAINS IMPORTANT SAFETY INFORMATION. READ CAREFULLY AND UNDERSTAND ALL INFORMATION BEFORE OPERATING TOOL. SAVE THIS MANUAL FOR FUTURE USE. FEATURES 4 Boom Positions with Rated Capacity Indicated Heavy Duty Slow Release Power Unit SPECIFICATIONS: 4" Front Leg Clearance Pos. 1 8 Ton Quick Lift Ram Pos. 2 Pos. 3 Pos. 4 Max. Boom Ht. ..........95.
PAGE 2
ASSEMBLY INSTRUCTIONS OPERATING INSTRUCTIONS NOTE: An assistant is required to assemble this unit and minimize the potential hazards and/or injury. 1. Lock the boom in place for the proper weight marking using the lock pin BEFORE APPLYING THE LOAD TO THE LIFT. Do not exceed the rated capacity and travel limits of the equipment. 1. Line up the holes on the Caster Wheels (29) with the matching holes on the Base (7) and attach with Bolts (32). 2.
PAGE 3
MODEL # 5218 4000 Lb. Capacity Low Clearance Breakdown Engine Crane Item # Part # Description Qty.
PAGE 4
MAINTENANCE AND INSPECTION CHECK OIL LEVEL 1. Inspect the crane before each use. Check for cracks in the jack support, boom and boom extension. Check for loose, missing or damaged parts and for hydraulic oil leaks. If the crane is damaged in any way, it should be removed from service immediately. 2. Check for unauthorized modification of the product. Modifications to this product and/or use of unapproved attachments are prohibited due to the potential hazards that are associated with improper use. 3.