Instructions / Assembly

ManualsBrandsSUNEX TOOLS ManualsTool CartsDeluxe 22 in. 4-Drawer Flip Top Utility Cart in Blue

8013ADLX: Parts Breakdown & Operating Manual 4 rev. 082107

Item Part # # Req’d Description

1 * 2 Chrome Leg/ea.

2 RSSCPLW 2 Locking Caster/ea.

3 RSSCPW 2 Non-Locking Caster/ea.

4 RSSCPP1 1 Set of 4 Plastic Inserts

5 RSSCPHK 1 Bolt Kit (Incl. 8 ea. of 10mm and 14mm

bolts, nuts, washers and 4 screws)

6 8011 1 Red Pry Bar Holder

8011BK Black Pry Bar Holder

8011BL Blue Pry Bar Holder

8011Y Yellow Pry Bar Holder

7 8004 1 Red Side Work Station

8004BK Black Side Work Station

8004BL Blue Side Work Station

8004Y Yellow Side Work Station

8 8002 1 Red Top Lid

8002BK Black Top Lid

8002BL1 Blue Top Lid

8002Y Yellow Top Lid

* For replacement, purchase RSSC7, Chrome Leg, and 8014, Leg Extensions.

PARTS BREAKDOWN

MODEL 8013ADLX / 8013ABKDLX

8013ABLDLX / 8013AYDLX

SERVICE CART WITH

LOCKING TOP & DRAWERS

INCLUDES PRY BAR HOLDER AND SIDE WORK BENCH

REPlAcEmENT PARTS lIST

Part # Description

RS3DHDL Short Chrome Drawer Handle

RS3DHDLB Short Black Drawer Handle

RS8006HDL Long Chrome Drawer Handle

RS8006HDLB Long Black Drawer Handle

RS8006HDLS Handle Screws (Set of 4)

RSRBSLIDEC2 Clip-On Roller Bearing Slide/pr.

8006RB Red Replacement Large Drawer

8006CRBBK Black Replacement Large Drawer

8006CRBBL Blue Replacement Large Drawer

8006CRBY Yellow Replacement Large Drawer

8016 Red Replacement 3 Drawer Unit

8016BK Black Replacement 3 Drawer Unit

8016BL Blue Replacement 3 Drawer Unit

8016Y Yellow Replacement 3 Drawer Unit

8007 Red Replacement Third Shelf

8007BK Black Replacement Third Shelf

8007BL1 Blue Replacement Third Shelf

8007Y Yellow Replacement Third Shelf

8013LS 4-Piece Lock & Key Set, Keyed Alike

1110 EVA Foam for Trays / 10-pk.

1111 EVA Foam for Drawers / 10-pk.

8004SSM Rubber Liner for Side Shelf / 10-pk.

AlSO AVAIlABlE

Summary of content (4 pages)

PAGE 1
MODEL 8013ADLX / 8013ABKDLX 8013ABLDLX / 8013AYDLX SERVICE CART WITH LOCKING TOP & DRAWERS INCLUDES PRY BAR HOLDER AND SIDE WORK BENCH PARTS BREAKDOWN 1 8 ALSO AVAILABLE 7 1 Part # Description RS3DHDL Short Chrome Drawer Handle RS3DHDLB Short Black Drawer Handle RS8006HDL Long Chrome Drawer Handle RS8006HDLB Long Black Drawer Handle RS8006HDLS Handle Screws (Set of 4) RSRBSLIDEC2 Clip-On Roller Bearing Slide/pr.
PAGE 2
MODEL 8013ADLX / 8013ABKDLX 8013ABLDLX / 8013AYDLX SERVICE CART WITH LOCKING TOP & DRAWERS INCLUDES PRY BAR HOLDER AND SIDE WORK BENCH OPERATING MANUAL THIS OPERATING MANUAL CONTAINS IMPORTANT SAFETY INFORMATION. READ CAREFULLY AND UNDERSTAND ALL INFORMATION BEFORE OPERATING THIS TOOL. SAVE THIS MANUAL FOR FUTURE USE. © Copyright 2007, Sunex Tools® PARTS LIST Examine box contents, then proceed with the following instructions.
PAGE 3
ASSEMBLY INSTRUCTIONS 1. Locking Drawer Assy. NOTE Locking Top Do not fully tighten fasteners until prompted. Chrome Legs Step 1: Assembly preparation. Clear table top and set Locking Drawer Assembly on table top, with lid facing up. Position the Locking Drawer Assembly so that one end hangs off of the table enough to allow the chrome legs to go through the square holes. Insert one set of chrome legs through the overhanging holes as shown in Figure 1. Do not bolt legs to top. 2. Table 2.
PAGE 4
ASSEMBLY INSTRUCTIONS 3. Step 3: Connecting the bottom tray to the chrome legs. Lift the cart and place on top of the bottom tray with chrome legs through the square leg-holes. Align bolt holes in bottom tray with lower holes in legs and insert a 10mm bolt through the washer, bolt holes, and legs as shown. Repeat with all remaining holes in bottom tray. Step 4: IMPORTANT: Tighten all bolts. At this point, all bolts should be tightened.