Use and Care Manual

ManualsBrandsSunex Tools ManualsTool Carts38 in. Premium Full 6-Drawer Service Utility Cart in Camo

8057CAMO 1 Rev. 05/02/16

Tools Needed for Assembly:

13mm Socket or Wrench

Assembly Instructions:

Mount push handle/brackets

assembly (Part #3) to the same

side of the cart as the swivel

locking casters using the four

stove bolts, washers, and

nuts provided.

Using 13mm socket or wrench

completely tighten all nuts.

Overall Load Capacity .........................600 Lbs. Top Compartment Capacity ..............180 Lbs. Drawer Capacity .................. 70 Lbs. Each

• It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsibility of the

device owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost or not legible,

contact Sunex Tools

for replacements. If the operator is not ﬂuent in English, the product and safety instructions shall be read and discussed with the

operator in the operator's native language by the purchaser/owner or his designee, making sure that the operator comprehends its contents. • Read,

study, understand & follow all instructions before using. • Do not load carts beyond rated capacity (600 Lbs.). • Lock lid and drawers before moving.

• Apply brake on locking casters anytime cart is in place. • Do not pull cart. Push from handle on end to move. • Units can tip or fall causing

damage or personal injury. • Do not stand on or step in drawers. • Do not open more than one loaded drawer at a time. • Cart is designed to roll

easily on ﬂat surfaces and should not be used on uneven or inclined surfaces. • Keep children away from unit. • Wear gloves when lifting by edges.

• This product may contain one or more chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Wash hands thoroughly after handling. • Failure to heed these warnings may result in personal injury and/or property damage.

SWIVEL

CASTERS

SWIVEL

LOCKING CASTERS

ASSEMBLY INSTRUCTIONS

MODEL 8057CAMO

PREMIUM FULL SERVICE

CART – CAMO

WARNING

Summary of content (7 pages)

PAGE 1
MODEL 8057CAMO PREMIUM FULL SERVICE CART – CAMO ASSEMBLY INSTRUCTIONS Tools Needed for Assembly: 13mm Socket or Wrench Assembly Instructions: Mount push handle/brackets assembly (Part #3) to the same side of the cart as the swivel locking casters using the four stove bolts, washers, and nuts provided. Using 13mm socket or wrench completely tighten all nuts. #3 SWIVEL CASTERS SWIVEL LOCKING CASTERS WARNING Overall Load Capacity..........................600 Lbs. Top Compartment Capacity..............
PAGE 2
MODEL 8057CAMO PREMIUM FULL SERVICE CART – CAMO TROUBLESHOOTING Hardware Specifications: Handle Hardware 4 pcs 4 pcs 4 pcs Caster Hardware 16 pcs 16 pcs 16 pcs PROBLEM: Drawers appear not to fit, do not slide in accurately and bump the cart sides. SOLUTION: The roller bearing slides must be fully engaged into the mounting slots on all drawers (see fig. 1 below). They potentially could fall out of position during shipment. Check the side of the cart to determine which slide is out of position.
PAGE 3
MODEL 8057CAMO PREMIUM FULL SERVICE CART – CAMO PARTS BREAKDOWN 5 6 1 11 15 12 17 15 2 9 14 3 4 16 8 10 7 PARTS LIST Ref No. Part No. 1 2 3 4 5 6 RS8057XTPHBK 7 RS8057SLCBK 8 RS8057SCBK 9 RS8057LKS Description Qty Top Lid – Camo Base, PMS 417C 1 w/Crosshairs logo 3" Drawer – Camo Base, PMS 417C 3 4" Drawer – Camo Base, PMS 417C 2 5" Drawer – Camo Base, PMS 417C 1 Locking Mechanism – Camo Base, 1 PMS 417C (excludes lock) Push Handle - Black (incl.
PAGE 4
MODELO 8057CAMO CARRITO DE SERVICIO COMPLETO PREMIUM – CAMO INSTRUCCIONES DE ENSAMBLADO Herramientas necesarias para el ensamblado: Llave o dado de 13mm Instrucciones de ensamblado: Instale el montaje del manillar/ abrazaderas (Pieza Núm. 3) del mismo lado del carrito que las ruedas pivotantes con sistema de bloqueo mediante la utilización de los cuatro pernos de cabeza ranurada, las arandelas y las tuercas provistas para su instalación.
PAGE 5
MODELO 8057CAMO CARRITO DE SERVICIO COMPLETO PREMIUM – CAMO PROBLEMAS Y SOLUCIONES Spécifications du matériel : Manipuler le matériel 4 pcs 4 pcs 4 pcs Matériel des roulettes 16 pcs 16 pcs 16 pcs PROBLEMA: Las gavetas parecen no encajar, no se deslizan correctamente hacia adentro y sobresalen por los laterales del carrito. SOLUCIÓN: Las correderas de rodamientos de rodillos deben insertarse por completo en las ranuras de montaje en todas las gavetas (ver figura 1 abajo).
PAGE 6
MODÈLE 8057CAMO CHARIOT DE SERVICE COMPLET PREMIUM – CAMO INSTRUCTIONS D'ASSEMBLAGE Outil nécessaire pour l’assemblage : Clé à molette ou à douille de 13 mm Instructions d’assemblage : Assemblez l’ensemble poignée de poussée/supports (pièce #3) du même côté du chariot que les roulettes pivotantes bloquantes, en utilisant les quatre boulons poêliers, les rondelles et les écrous fournis. #3 En utilisant une clé à douille ou à molette de 13 mm serrez bien tous les écrous.
PAGE 7
MODÈLE 8057CAMO CHARIOT DE SERVICE COMPLET PREMIUM – CAMO DÉPANNAGE Especificaciones de ferretería: Ferretería del mango 4 pcs 4 pcs 4 pcs Ferretería de rodajas 16 pcs 16 pcs 16 pcs PROBLÈME: Les tiroirs ne glissent pas convenablement, ils ont l’air d’être mal installés et ils cognent sur les côtés du chariot. SOLUTION: Les glissières à roulement à rouleaux doivent être complètement engagées dans les rainures de fixation de tous les tiroirs (voir fig. 1 en bas).