User Manual

ManualsBrandsSunex Tools ManualsToolsSX211A

SX211A: Parts Breakdown & Operating Manual 1 06/08/09

Operating Instructions • Warning Information • Parts Break down

Max. Free Speed ............ 11,000 RPM

Wheel Size .......................................4"

Air Inlet ................................. 1/4" NPT

Air Supply Hose Size .............3/8" I.D.

Recommended

Air Pressure ...............90 PSI (6.2 Bar)

SX211A

4" HEAVY

DUTY ANGLE

GRINDER

Average Air Consumption ....... 6 CFM

Sound Pressure Level ............ 89 dBA

Length ....................................... 9-1/2"

Weight ..........................................4 LB

SPECIFICATIONS

ALWAYS READ

INSTRUCTIONS

BEFORE USING

POWER TOOLS

ALWAYS WEAR

SAFETY GOGGLES

WEAR HEARING

PROTECTION

AVOID PROLONGED

EXPOSURE TO

VIBRATION

RPM OF GRINDING

WHEEL MUST EXCEED

RPM OF TOOL

(11,000 RPM)

Some dust created by power sanding, sawing, grinding, drilling, and other

construction activities contains chemicals known to cause cancer, birth

defects or other reproductive harm. Some examples of these chemicals are:

• leadfromlead-basedpaints,

• crystallinesilicafrombricksandcement

and other masonry products, and

• arsenicandchromiumfrom

 chemically-treatedlumber.

Your risk from these exposures varies, depending on how often you do this

type of work. To reduce your exposure to these chemicals: work in a well

ventilated area, and work with approved safety equipment, such as those

dust masks that are specially designed to filter out microscopic particles.

AVERTISSEMENT

ADVERTENCIA

WARNING

AVERTISSEMENT

ADVERTENCIA

WARNING

RPMRPMRPM

Summary of content (10 pages)

PAGE 1
Operating Instructions • Warning Information • Parts Breakdown WARNING WARNING WARNING WARNING Always read ADVERTENCIA instructions before using Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm.
PAGE 2
WARNING WARNING WARNING! FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY. This Instruction Manual Important Safety Information. ADVERTENCIA Contains • Slipping, tripping and/or falling while operating air tools can be a major cause of serious injury or death. Be aware of excess hose left on the walking or work surface. ADVERTENCIA Read THIS INSTRUCTION MANUAL Carefully and understand ALL INFORMATION Before Operating THIS Tool. • Keep body working stance balanced and firm.
PAGE 3
SX211A 4" HEAVY DUTY ANGLE GRINDER REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 PART NO. RS21101 RS21158 RS21157 RS21160 RS41205 RS41206 RS41207 RS21154 RS21156 RS41210 RS43006 RS21146 RS30524 RS21126 RS21124 RS21125 RS21122 RS41218 RS21120 RS21118 RS41221 RS41222 RS21151 RS43007 RS41225 RS41226 RS21102 RS21114 RS21113 DESCRIPTION Motor Housing Spring Pin (4x28) Air Inlet Throttle Lever Assy. Valve Stem Bushing O-Ring (4.9x2.
PAGE 4
Operating Instructions • Warning Information • Parts Breakdown Operation... Always use the recommended wheel guard to prevent injury from broken grinding wheel parts. If a guard has withstood a wheel breakage, discontinue its use and replace it with a new guard. It may be damaged. Position the guard between the grinding wheel and the operator. Use barriers to protect others from wheel fragments and grinding sparks.
PAGE 5
• Instrucciones de Operación • Información de Advertencia • Revisión de Refacciones WARNING WARNING WARNING ADVERTENCIA WARNING ADVERTENCIA ADVERTENCIA ADVERTENCIA LEER SIEMPRE LAS INSTRUCCIONES AVERTISSEMENT El polvo creado por la lijación eléctrica, la aserradura, la trituración, la perforación y otras actividades de construcción contiene químicos conocidos como causantes de cáncer, defectos de nacimiento u otros daños a reproducción.
PAGE 6
ADVERTENCIA ADVERTENCIA WARNING! EL INCUMPLIMIENTO DE OBSERVAR ESTAS ADVERTENCIAS PUEDEN RESULTAR EN ALGUNA LESIÓN AVERTISSEMENT ESTE MANUAL DE INSTRUCCIONES CONTIENE INFORMACIÓN IMPORTANTE DE SEGURIDAD. LEA CUIDADOSAMENTE ESTE MANUAL INSTRUCTIVO Y COMPRENDA TODA INFORMACIÓN ANTES DE OPERAR ESTA HERRAMIENTA.
PAGE 7
• Instrucciones de Operación • Información de Advertencia • Revisión de Refacciones reducir el suministro de aire. Depósitos de arenilla o goma en la herramienta pueden cortar la potencia y pueden corregirse limpiando el aspirador de aire y limpiando a chorro la herramienta con aceite que disuelva la goma o una mezcla de partes iguales de SAE #10 y querosén.
PAGE 8
• Instructions de fonctionnement • Avertissement • Pièces WARNING WARNING ADVERTENCIA WARNING ADVERTENCIA WARNING AVERTISSEMENT ADVERTENCIA AVERTISSEMENT AVERTISSEMENT ADVERTENCIA AVERTISSEMENT LISEZ TOUJOURS LES INSTRUCTIONS AVANT D’UTILISER LES OUTILS MOTORISÉS.
PAGE 9
AVERTISSEMENT WARNING! AVERTISSEMENT LE NON-RESPECT DE CES AVERTISSEMENTS POURRAIT ENTRAÎNER DES BLESSURES. LE PRÉSENT MANUEL D’INSTRUCTIONS CONTIENT DES RENSEIGNEMENT IMPORTANTS POUR LA SÉCURITÉ. LISEZ LE PRÉSENT MANUEL D’INSTRUCTIONS SOIGNEUSEMENT ET COMPRENEZ BIEN TOUS LES RENSEIGNEMENTS AVANT D’UTILISER CET OUTIL. • Utilisez, inspectez et entretenez cet outil conformément au document American National Standards Institute Safety Code of Portable Air Tools (ANSI B186.
PAGE 10
• Instructions de fonctionnement • Avertissement • Pièces Mode d’emploi • Toujours utiliser la plaque de garde recommandée pour la meule afin de prévenir les blessures qui pourraient survenir à cause des parties brisées d’une meule. Si une plaque de garde a résisté à la rupture d’une meule, cesser de l’utiliser et la remplacer par une nouvelle. Elle pourrait être endommagée. Placer la plaque de garde entre la meule et l’opérateur.