Owner's manual

ManualsBrandsSunex Tools ManualsToolsSX232B

SX232B 1 Rev. 08/29/07

SX232B

1/4" Dr.

ANGLE

DIE GrINDEr

Max. Free Speed.................20,000 RPM

Collet Size (In.) ................................1/4"

Air Inlet ....................................1/4" NPT

Rec. Hose Size ..........................3/8" I.D.

Rec. Air Pressure .......................90 PSIG

Avg. Air Consumption...................4 CFM

Length ............................................. 6.2"

Sound Level .............................93.6 dBA

Shipping Weight ....................... 1.11 lbs.

SPECIFICATIONS

ALWAYS READ

INSTRUCTIONS

BEFORE USING

POWER TOOLS

ALWAYS WEAR

SAFETY GOGGLES

WEAR HEARING

PROTECTION

AVOID PROLONGED

EXPOSURE TO

VIBRATION

Some dust created by power sanding, sawing, grinding, drilling,

and other construction activities contains chemicals known to

cause cancer, birth defects or other reproductive harm. Some

examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement

and other masonry products, and

• arsenic and chromium from

chemically-treated lumber.

Your risk from these exposures varies, depending on how often you

do this type of work. To reduce your exposure to these chemicals:

work in a well ventilated area, and work with approved safety

equipment, such as those dust masks that are specially designed

to filter out microscopic particles.

Operating Instructions • Warning Information • Parts Breakdown

• MAXIMUM RPM OF 20,000

• MAX AIR PRESSURE:

90 PSIG, 6.2 BAR

• RPM OF THE ACCESSORY

MUST EXCEED TOOL RPM

SX232B_manual_082907.indd 1 8/31/07 1:58:41 PM

Summary of content (10 pages)

PAGE 1
Operating Instructions • Warning Information • Parts Breakdown • Maximum RPM of 20,000 Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • max air pressure: 90 psig, 6.
PAGE 2
FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY This Instruction Manual Contains Important Safety Information. • Place the tool on the work before starting the tool. Do not point or indulge in any horseplay with this tool. Read THIS INSTRUCTION MANUAL Carefully and understand ALL INFORMATION Before Operating THIS Tool. • Slipping, tripping and/or falling while operating air tools can be a major cause of serious injury or death. Be aware of excess hose left on the walking or work surface.
PAGE 3
SX232B: 1/4" DR ANGLE DIE GRINDER 39 41 40 33 36 35 29 8 3 34 37 38 7 31 5 4 17 6 2 32 20 19 23 9 10 42 24 25 43 27 30 29 21 22 REF. NO. 1-17 19-30 29, 33-38 18 31 32 40 41 42 43 SX232B_manual_082907.indd 3 1 26 28 SX232B 18 11 12 13 14 15 16 21 PART NO.
PAGE 4
Operating Instructions • Warning Information • Parts Breakdown %P /PU *O TUBMM 2VJDL $PVQMJOH )FSF 8IJQ )PTF /JQQMF -FBEFS )PTF 'JMUFS "JS 4VQQMZ /JQQMF 2VJDL $PVQMFS 0JMFS 3FHVMBUPS %SBJO %BJMZ Air Supply... Tools of this class operate on a wide range of air pressures. It is recommended that air pressure of these tools measures 90 PSI at the tool while running free. Higher pressure (over 90 psig; 6.
PAGE 5
Instrucciones operativas • Información precautoria • Esquema de los componentes • RPM MÁXIMAS DE 20,000 Lijar, cortar, esmerilar, taladrar y otras actividades propias de las obras en construcción, con equipo neumático pudieran crearse ciertos polvos identificados como causantes de cáncer, defectos en el nacimiento u otras lesiones en los órganos reproductores.
PAGE 6
OMITIR RESPETAR ESTAS ADVERTENCIAS PUDIERA DAR COMO RESULTADO LESIONARSE. Este manual instructivo contiene información importante relacionada con su seguridad. • Coloque la herramienta sobre el trabajo antes de prenderla. No la apunte ni haga payasadas con esta herramienta. • Resbalarse, tropezarse y/o caerse durante la operación de herramientas neumáticas puede ser una causa mayor de lesión seria o la muerte. Sea consciente de la manguera excedente, dejada por la superficie para caminar o trabajar.
PAGE 7
Instrucciones operativas • Información precautoria • Esquema de los componentes Abasto de aire... Las herramientas de esta clase operan en una amplia gama de presiones neumáticas. Se recomienda que la presión neumática para esta clase de herramientas mida 90 psig en la herramienta mientras la herramienta funciona sin carga. La presión neumática más elevada (más de 90 psig, 6.
PAGE 8
Instructions d'utilisation • Avertissements • Liste des pièces • MAXIMUM de 20000 tr/min Certains types de poussières produites par le sablage, le sciage, le meulage et d'autres activités de construction contiennent des produits chimiques cancérigènes, qui causent des anomalies congénitales ou d'autres dangers pour la reproduction.
PAGE 9
NÉGLIGER D'OBSERVER CES AVERTISSEMENTS PEUT ENTRAŒNER DES BLESSURES LE PRÉSENT MANUEL D’INSTRUCTIONS CONTIENT DES RENSEIGNEMENTS IMPORTANTS POUR LA SÉCURITÉ. LISEZ LE PRÉSENT MANUEL D’INSTRUCTIONS SOIGNEUSEMENT ET COMPRENEZ BIEN TOUS LES RENSEIGNEMENTS AVANT D’UTILISER CET OUTIL. • Utilisez, inspectez et entretenez cet outil conformément au document American National Standards Institute Safety Code of Portable Air Tools (ANSI B186.
PAGE 10
Instructions d'utilisation • Avertissements • Liste des pièces Alimentation en air... D'autres facteurs en dehors de l'outil peuvent causer la perte de puissance ou une action erratique. Le rendement réduit du compresseur, le drainage excessif de la conduite d’air, l'humidité, des restrictions dans les conduites d'air ou l'utilisation de raccordements de boyau de dimension inexacte ou en mauvaise condition peuvent réduire l'alimentation en air.