Manual

ManualsBrandsSunex Tools ManualsToolsSX245K

SX245K 1 Rev. 09/11/03

SX245K

Pencil Die

Grinder Set

SPECIFICATIONS

Free Speed . . . . . . . .58,000 RPM

Collet Size (In.) . . . . . . . . . .1/8"

Air Inlet (NPT) . . . . . . . . . . .1/4"

Hose Size (I.D.) . . . . . . . . .3/16"

Air Pressure . . . . . . . . . . .90 PSI

Air Consumption (CFM) . . . .5.3

Sound Level (dBA) . . . . . . . . .72

Length (In.) . . . . . . . . . . .5-1/4

Shipping Wt. (Lbs.) . . . . . . . . .2

Some dust created by power sanding, sawing, grinding, drilling,

and other construction activities contains chemicals known to

cause cancer, birth defects or other reproductive harm. Some

examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement

and other masonry products, and

• arsenic and chromium from

chemically-treated lumber.

Your risk from these exposures varies, depending on how often

you do this type of work. To reduce your exposure to these

chemicals: work in a well ventilated area, and work with

approved safety equipment, such as those dust masks that are

specially designed to filter out microscopic particles.

Operating Instructions • Warning Information • Parts Breakdown

ALWAYS READ

INSTRUCTIONS

BEFORE USING

POWER TOOLS

ALWAYS WEAR

SAFETY GOGGLES

WEAR HEARING

PROTECTION

AVOID

PROLONGED

EXPOSURE TO

VIBRATION

• MAXIMUM RPM OF 58,000

• MAX AIR PRESSURE: 90

PSIG, 6.2 BAR

• RPM OF THE ACCESSORY

MUST EXCEED TOOL RPM

Summary of content (4 pages)

PAGE 1
Operating Instructions • Warning Information • Parts Breakdown • MAXIMUM RPM OF 58,000 Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • MAX AIR PRESSURE: 90 PSIG, 6.
PAGE 2
FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY. • Place the tool on the work before starting the tool. THIS INSTRUCTION MANUAL CONTAINS IMPORTANT SAFETY INFORMATION. • Slipping, tripping and/or falling while operating air tools can be a major cause of serious injury or death. Be aware of excess hose left on the walking or work surface. READ THIS INSTRUCTION MANUAL CAREFULLY AND UNDERSTAND ALL INFORMATION BEFORE OPERATING THIS TOOL. • Keep body working stance balanced and firm.
PAGE 3
SX245K Pencil Die Grinder Set Ref.
PAGE 4
Operating Instructions • Warning Information • Parts Breakdown Do Not Install Quick Coupling Here Filter Nipple Nipple Operation... Air Supply Whip Hose Quick Coupler Leader Hose Oiler When using the grinder, be careful not to exert excessive force. Too much force may be hazardous, if it causes the cutting tool spindle to bend or break. The burning of the work piece or excessive speed reduction indicates too much force being applied.