Instructions / Assembly

ManualsBrandsSunex ManualsTool Carts28 in. 4-Drawer Utility Cart in Black

8054 and 8054BK 1 rev.06/11/18

16A

WARNINGS, ASSEMBLY INSTRUCTIONS & PARTS BREAKDOWN

PARTS LIST

A-Drawer

Assembly

Barrel Keys

Locking Casters (2) Non-Locking Casters (2)

Push Handle (1)

Ratchet

with 13 mm

socket

13mm

Wrench

Adjustable

Wrench

2 People

Legs (4)

Tabletop or

workbench*

B-Bottom Tray

M8 x 19 (4 pcs.) M8 Washer (72 pcs.)

M8 x 17 (36 pcs.) M8 Locking Nut (56 pcs.)

M8 x 16 (16 pcs.)

Read and follow all instructions in User's Manual. It is the responsibility of the owner to make sure all personnel

read this manual prior to using the device. It is also the responsibility of the device owner to keep this manual

intact and in a convenient location for all to see and read. If the manual or product labels are lost or not legible,

contact Sunex Tools

for replacements. If the operator is not ﬂuent in English, the product and safety instructions

shall be read and discussed with the operator in the operator's native language by the purchaser/owner or his

designee, making sure that the operator comprehends its contents.

TOOLS NEEDED

Read and follow all instructions in User's Manual. • Do not load carts beyond rated capacity 500 lbs. (Top Bin and Bottom Shelf 140 lbs. each) (Top, Middle and Bottom Drawers 70 lbs. each)•

Lock lid and drawers before moving. • Apply brake on locking casters anytime cart is in place. • Units can tip or fall causing damage or personal injury. • Cart is designed to roll easily on

ﬂat surfaces and should not be used on uneven or inclined surfaces. • Do not open more than one loaded drawer at a time. •Do not stand on or step in drawers. • Keep children away from

unit. • Wear gloves when lifting edges. • Failure to heed these warnings may result in personal injury and/or property damage.

WARNING

MODEL 8054 / 8054BK

500 LBS CAPACITY, LOCKING TOP

4 DRAWER SERVICE CART

WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer and

birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Summary of content (10 pages)

PAGE 1
MODEL 8054 / 8054BK 500 LBS CAPACITY, LOCKING TOP 4 DRAWER SERVICE CART WARNINGS, ASSEMBLY INSTRUCTIONS & PARTS BREAKDOWN Read and follow all instructions in User's Manual. It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsibility of the device owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost or not legible, contact Sunex Tools® for replacements.
PAGE 2
ASSEMBLY INSTRUCTIONS 2. Step 1: Assembly Preparation Remove all contents from box. Reference the parts list to make sure you have all the parts. CAUTION NOTE Verify your tabletop or workbench can support 150 lbs. (68 kg.). Failure to follow this warning could result in damage to property or personal injury. 2.a Cover table or workbench to prevent any damage to surface. Step 2: Attaching Casters Turn bottom tray (B) upside down.
PAGE 3
ASSEMBLY INSTRUCTIONS Step 4: Attaching the Handles 4. Align the other legs with the front corners of the bottom tray and drawer assembly and let them rest on top as shown in figure 4. Align the hole on the handle with the second hole down on the drawer assembly and (un-attached) leg as shown in figure 4. Insert handle bolts through handle, through the leg, and into the drawer assembly as shown in figure 4. Secure with washer and nut from handle bolt kit and hand tighten.
PAGE 4
MODEL 8054 / 8054BK 500 LBS CAPACITY, LOCKING TOP 4 DRAWER SERVICE CART PARTS BREAKDOWN 19 1 18 2 17 16 3 4 16A 5 15 6 14 13 7 12 8 11 9 10 REPLACEMENT PARTS LIST Item Part # 1 8054TL 8054TLBK 2 RSGP 3 8054TC 8054TCBK 4+5 RS8050PH 6 8054TD 8054TDBK 7 RSRBS 8 8054MD 8054MDBK 9 8050BT 8050BTBK 10 RSSWLCS 11 RSSWCS 12 RS8050SCDR RS8050SCDBK 13 RS8050LGR RS8050LGBK 8054 and 8054BK Description # Top Lid (Red) Top Lid (Black) Gas Shock/each Top Compartment (Red) Top Compartment (Black)
PAGE 5
MODELO 8054 / 8054BK CAPACIDAD 500 LBS, TAPA DE SEGURIDAD CARRO DE SERVICIO DE 4 CAJONES DESGLOSE DE PARTES & MANUAL DE OPERACIÓN Lea y comprenda todas las instrucciones. Hacer caso omiso al seguir todas las instrucciones alistadas a continuación podría ocasionar el choque eléctrico, incendio, explosiones y/o lesiones personales serias. Es las responsabilidad del propietario asegurarse que todo el personal lea este manual previo al uso de este dispositivo.
PAGE 6
INSTRUCCIONES DE ENSAMBLADO 2. Paso 1: Preparación del ensamblado Saque todo el contenido de la caja. Consulte la lista de partes para asegurar que usted cuente con todas las partes. PRECAUCIÓN NOTA Verifique que su tablero o banco de trabajo pueda soportar 150 lbs. (68 kg.). Hacer caso omiso a esta advertencia podría ocasionar daños a la propiedad o lesiones personales. 2.a Cubra la mesa o banco de trabajo para prevenir cualquier daño a la superficie.
PAGE 7
INSTRUCCIONES DE ENSAMBLADO Paso 4: Sujetando los manubrios Alinee las otras dos patas restantes con las esquinas delanteras de la charola inferior y en el conjunto de los cajones y luego déjelos caer sobre la superficie según se ilustra en la figura 4. Alinee el agujero del manubrio con el agujero segundo siguiente en el conjunto de los cajones y en la pata (no sujetada), según se ilustra en la figura 4.
PAGE 8
MODÈLE 8054 / 8054BK CAPACITÉ DE 500 LB, DESSUS VERROUILLABLE CHARIOT DE SERVICE À 4 TIROIRS VUE ÉCLATÉE DES PIÈCES ET MODE D’EMPLOI Veuillez lire et bien comprendre toutes les instructions. Tout manquement aux instructions indiquées ci-après pourrait entraîner un choc électrique, un incendie, une explosion et/ou des blessures personnelles graves. Il est de la responsabilité du propriétaire de s'assurer que tout le personnel lise ce manuel avant d'utiliser l'appareil.
PAGE 9
INSTRUCTIONS DE MONTAGE 2. 1re étape : Montage Retirez tout le contenu de la boîte. Référez-vous à la liste des pièces afin de vous assurer d’avoir toutes les pièces. ATTENTION REMARQUE Assurez-vous que le dessus de votre table de travail ou de votre établi puisse bien supporter 150 lb (68 kg). Le manque à observer cette consigne peut causer des dommages matériels ou des blessures corporelles. 2.a Couvrez la table ou l’établi pour empêcher tout dommage à la surface.
PAGE 10
INSTRUCTIONS DE MONTAGE 4e étape : Fixation de la poignée 4. Alignez les deux autres pattes avec les coins avant du plateau inférieur et du tiroir et laissez-les reposer sur le dessus comme illustré à la figure 4. Alignez le trou de la poignée avec le deuxième trou au bas du tiroir et de la patte (non fixée) comme illustré à la figure 4. Insérez les boulons de la poignée à travers celle-ci, à travers la patte et dans le tiroir comme illustré à la figure 4.