Use and Care Manual

ManualsBrandsSunex ManualsAir Compressors, Tools & AccessoriesLong Barrel Air Hammer

SX243 1 Rev. 11/19/04

SX243

HEAVY DUTY

ONG BARREL

IR HAMMER

WITH COMFORT GRIP AND

QUICK CHANGE CHUCK

SPECIFICATIONS

Blows Per Minute ................. 2,200

Bore Diameter ........................

3/4"

Piston Stroke .......................

3-3/4"

Air Inlet Thread ...........

1/4"-18NPT

Hose Size ........................3/8" I.D.

Air Pressure .........90 psig (6.2 bar)

Avg. Air Consumption ......... 4 CFM

Sound Level .....................

110 dBA

Length ................ 10.63" (270 mm)

Shipping Wt. ...... 5.66 lbs. (2.6 kg)

Operating Instructions • Warning Information • Parts Breakdown

ALWAYS READ

INSTRUCTIONS

BEFORE USING

POWER TOOLS

ALWAYS WEAR

SAFETY GOGGLES

WEAR HEARING

PROTECTION

AVOID

PROLONGED

EXPOSURE TO

VIBRATION

Some dust created by power sanding, sawing, grinding, drilling,

and other construction activities contains chemicals known to

cause cancer, birth defects or other reproductive harm. Some

examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement

and other masonry products, and

• arsenic and chromium from

chemically-treated lumber.

Your risk from these exposures varies, depending on how

often you do this type of work. To reduce your exposure to

these chemicals: work in a well ventilated area, and work with

approved safety equipment, such as those dust masks that are

specially designed to filter out microscopic particles.

SX243om_111904.indd 1 11/19/04 2:58:01 PM

Summary of content (10 pages)

PAGE 1
Operating Instructions • Warning Information • Parts Breakdown Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm.
PAGE 2
WARNING! FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY. This Instruction Manual Contains Important Safety Information. discomfort, tingling feeling or pain occurs. Seek medical advice before resuming use. READ THIS INSTRUCTION MANUAL CAREFULLY AND UNDERSTAND ALL INFORMATION BEFORE OPERATING THIS TOOL. • Place the tool on the work before starting the tool. Do not point or indulge in any horseplay with this tool.
PAGE 3
SX243 Heavy Duty Long Barrel Air Hammer with Comfort Grip and Quick Change Chuck 25 21 24 1 15 22 20 15-1 17 14 13 12 10 11 8 7 9 23 2 4 5 3 6 Ref. # Item # 1 RS243001 2 RS848002 3 RS848003 4 RS848004 5 RS848005 6 RS848006 7 RS848007 8 RS848008V 9 RS848009 10 RS848010 11 RS848011 12 RS848012 SX243 SX243om_111904.indd 3 Ref. # 13 14 15-1 15 17 20 21 22 23 24 25 DESCRIPTION QTY Housing (incl. #2-14, 22) 1 Roll Pin (3 x 18mm) 2 Inlet Bushing 1 Cap 1 O-Ring (4.9 x 2.
PAGE 4
Operating Instructions • Warning Information • Parts Breakdown Lubrication... Lubricate the air motor daily with quality air tool oil. If no air line oiler is used, run a teaspoon of oil through the tool. The oil can be squirted into the tool air inlet or into the hose at the nearest connection to the air supply, then run the tool. Operation... Always place a chisel in the hammer and hold the tool down to the work before operating.
PAGE 5
Instrucciones operativas • Información precautoria • Esquema de los componentes Lijar, cortar, esmerilar, taladrar y otras actividades propias de las obras en construcción, con equipo neumático pudieran crearse ciertos polvos identificados como causantes de cáncer, defectos en el nacimiento u otras lesiones en los órganos reproductores.
PAGE 6
OMITIR RESPETAR ESTAS ADVERTENCIAS PUDIERA DAR COMO RESULTADO LESIONARSE. Este manual instructivo contiene información importante relacionada con su seguridad. • Las herramientas neumáticas vibran durante su uso. La vibración, los movimientos repetitivos o las posiciones incómodas durante extensos periodos de tiempo pudieran serles nocivos a sus manos y brazos. Suspenda el uso de esta herramienta si sufre de alguna molestia, siente hormigueo dolor.
PAGE 7
Instrucciones operativas • Información precautoria • Esquema de los componentes GARANTÍA LIMITADA Abasto de aire... SUNEX INTERNATIONAL, INC., LE GARANTIZA A SUS CLIENTES QUE LAS HERRAMIENTAS Y PRODUCTOS CON LA MARCA DE LA EMPRESA SUNEX TOOLS NO CONTIENEN DEFECTOS EN SU MANO DE OBRA NI MATERIAS PRIMAS. Sunex International, Inc.
PAGE 8
Instructions d'utilisation • Avertissements • Liste des pièces Certains types de poussières produites par le sablage, le sciage, le meulage et d'autres activités de construction contiennent des produits chimiques cancérigènes, qui causent des anomalies congénitales ou d'autres dangers pour la reproduction.
PAGE 9
NÉGLIGER D'OBSERVER CES AVERTISSEMENTS PEUT ENTRAŒNER DES BLESSURES mains ou à vos bras. Cesser d'utiliser l'outil lorsqu'une sensation d'inconfort, de fourmillement ou de douleur survient Consulter un médecin avant de reprendre l'utilisation. Ce manuel d'instructions contient des informations importantes sur la sécurité. LIRE CE MANUEL D'INSTRUCTIONS AVEC ATTENTION ET COMPRENDRE L'INT…GRALIT… DES INFORMATIONS AVANT D'UTILISER CET OUTIL.
PAGE 10
Instructions d'utilisation • Avertissements • Liste des pièces Garantie limitée... SUNEX INTERNATIONAL, INC. GARANTIT À SES CLIENTS QUE LES OUTILS DE MARQUE SUNEX TOOLS SONT EXEMPTS DE DÉFAUTS DE MAIN D'(UVRE ET DE MATÉRIAU Sunex International, Inc.