Switch User Manual

Chapter 4 Command-Line Reference 4-37
Related Commands
show logging (4-37)
4.3.3.10 show logging
Use this command to display the current logging configuration, along with any
system and event messages stored in memory.
Syntax
show logging {flash | ram}
■ flash – Event history stored in Flash memory (permanent memory).
■ ram – Event history stored in temporary RAM (memory flushed on power
reset).
Default Setting
None
Command Mode
Privileged Exec
Command Usage
This command shows the following information:
■ Syslog logging – Whether or not system logging has been enabled using the
logging on command.
■ History logging in FLASH/RAM – The message level(s) that are reported based
on the logging history command.
■ Any system and event messages stored in memory.