User Manual

143
Experimental Procedures
Step 1: Build the circuit
Raspberry Pi T-Cobbler Barometer Module
SCL SCL1 SCL
SDA SDA1 SDA
5V 5V0 VCC
GND GND GND
Step2: Setup I2C (see Appendix 1. If you have set I2C, skip this step.)
For C language users:
Step 3: Download libi2c-dev
sudo apt-get install libi2c-dev
Step 4: Change directory
cd /home/pi/SunFounder_SensorKit_for_RPi2/C/31_barometer/