Manualshelf

User Manual

ManualsBrandsSunFounder ManualsComputers & AccessoriesRaspberry Pi 4 Display Touchscreen 7 Inch HDMI 1024×600 USB Screen Display Monitor for Raspberry Pi 400 4 3 Model B, 2 Model B, and 1 Model B+, Windows Capacitive Touch Screen
12345678910
Table Of Contents
2
Burn the System to TF Card
Note：
1）Do not install the Raspbian system by means of NOOBS, otherwise there appears
touch failure.
2）On other displays, if you have installed the system on your Raspberry Pi by means
of NOOBS, you can still use the 7-inch touch screen.
3）If you have already installed the system, you can directly skip this chapter. Turn to
next chapter to refer to Connect the Raspberry Pi and Screen, and you can get to use
the 7-inch touch screen.
Step 1
Prepare the tool of image burning. Here we use the Etcher. You can download the
software from the link:
https://www.balena.io/etcher/
Step 2
Download the complete image on the official website by clicking this link:
https://www.raspberrypi.org/downloads/raspbian/
. There are three different kinds
of Raspbian Stretches available, among which the Raspbian Stretch with desktop
and recommended software will be the best choice if you have no other special
requirements.