assembly Instructions

Introduction
5
Awning “SUNFUN”
 Introduction
Before you start mounting and
using the awning, please get
familiar with this product. So,
read the following mounting
instructions and safety instructions carefully
before using it. Use the product only as
described and for the purposes indicated.
Keep these instructions in a safe place.
When you pass the product on to any third
parties, you should give them these
instructions as well.
 Intended Use
The awning is suitable as a protection
against the sun. It may be adjusted to the
position of the sun for optimum shade. Any
other use or changes of the product are not
considered to be appropriate; they may
result in injury and/or damage to the product.
The manufacturer will accept no liability for
damages resulting from improper use. The
product is not intended for commercial use.
 Parts Description
1. Valance
2. Front rail
3A. Adjustable valance
3B. Awning fabric
4. Front profile
5. Case
6. Side cover
7. Bracket
8. Arm shoulder
9. Support tube
10. Folding arm
11. Valance arm
12. Third winding eye
13. Hand crank
14. First winding eye
15. Second winding eye
 Technical Data
Awning
Dimensions: 395x300cm
Fabric dimensions: 2980x3800mm
970x3750mm
Weight: Approx. 58 kg
Wind resistance: Class 2
Definition: Fresh breeze
Larger twigs and trees
move, wind clearly
audible
Speed; 29-38 km/h; 8-10.8 m/s
NOTE: If the awning is mounted
on wood, no wind class
can be indicated because
of the variance of this
material.
 Scope of Delivery
Check the scope of delivery for
completeness and perfect condition of the
product and all parts immediately after
unpacking.
1x Awning
3x Bracket for wall/ceiling mounting
6x Anchor dowel with bolt, washer and
clamping ring
3x Hexagon bolt, washer and nut
1x Crank
1x Mounting instructions
NOTE: The anchor dowels supplied are only
suitable for concrete walls and solid masonry.
If you building has an exterior shell (such
as insulation, double brick wall, brick
facing), the installation should be
performed by a professional.