Model #TPGAZ98018 USE AND CARE GUIDE
Important Safety Instructions WARNING! To reduce the risk of serious injury or damage to equipment, read all following safety instructions before assembling and using the gazebo. Failure to follow these warnings may result in serious injury or death. • Keep all children and pets away from assembly area. Children and pets should be supervised while gazebo is being assembled.
PREPARATION Required for Assembly: Hammer Screwdriver Safety goggles Gloves Hardhat Stepladder Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not a empt to assemble the product. Arrange manpower of 4 or more when assembling or moving the product. Es mated Assembly Time: 90 - 120 minutes. Maximum load for the roof hook: 50lbs.
HARDWARE INCLUDED AA BB CC DD EE FF GG HH II JJ KK Part Description Size QTY.
Pre-Assembly (continued) Package Contents ITEM DESCRIPTION QTY.
Pre-Assembly (continued) Package Contents ITEM DESCRIPTION QTY.
Assembly Instructions Step 1 I1 H I2 DD I1 H DD CC I2 1.Insert the Left Long Beam (I1) into the Right Long Beam (I2), then fasten the T-shape Connector (H) and Beams (I1/I2) together by using Bolt (DD). Step 2 J1 H J2 DD J1 H DD CC J2 2.Insert the Left Short Beam (J1) into the Right Short Beam (J2),then fasten the T-shape Connector (H) and Beams (J1/J2) together by using Bolt (DD).
Assembly Instructions Step 3 I1 I2 F AA I1 F F 3.Fix the Beams (I1/I2) with the Post (F) together by using Bolt (AA). Step 4 I1 J1 I2 J2 I2 J2 I1 J1 I1 J1 AA BB G J1 I1 F 4.Fix the BeamS (J1/J2) onto the Post (F) with Bolt (AA), then fix the U-shape Connector (G) onto the Post (F) with Bolt (BB).
Assembly Instructions Step 5 A B B A C C C C C1 C1 C1 C1 A C C C C C C1 C DD C1 F 5.Insert the Center Device (B) onto the Center brace (A), and insert the Diagonal Bracing Tube (C) into the Center Device (B), then insert the Top Bracing Stern Tube (C1) into the Diagonal Bracing Tube (C), and fix it with the U-shape Connector by using the Bolt (DD).
Assembly Instructions Step 6 E D E A DD E EE I2 E I1 E A B D DD D 6.Fix the Top Bracing Tube (E) with the Center brace (A) by using Bolt (EE), and fix the Top Bracing Tube (E) with the T-shape Connector by using Bolt (DD), insert the Top Bracing Middle Tube (D) into the Center Device (B), then fix the Top Bracing Middle Tube (D) with the T-shape Connector by using Bolt (DD).
Assembly Instructions Step 7 I1 I2 O H O J1 J2 O1 O1 H H O1 O1 J2 J1 O H O I2 I1 KK I1 FF KK O FF O1 J1 7.Insert one end of the Mosquito Net Tube (O/O1) into the T-shape Connector (H), then fix the Mosquito Net Tube (O/O1) and Cushion Block (KK) onto the beam by using the Bolt (FF).
Assembly Instructions Step 8 K L M/N L K/L D/E C/C1 JJ O/O1 F GG M/N 8.Cover the Canopy (K/L) on the top bracing tube as shown in the figure. Hang the Mosquito Net (M) and the Curtain (N) on the Net Tube (O/O1) with the hanger (JJ), then Insert the Post (F) into the ground with stake (GG).
