OPERATION MANUAL AND WARRANTY INFRARED FIREPLACE PLEASE READ THIS MANUAL 8
LIMITED THREE YEAR WARRANTY Safety Notice Please read this entire Operation and Warranty Manual BEFORE operating your new Thermal Wave Electronic Infrared Zone Heater.
TROUBLESHOOTING If your heater shuts off unexpectedly: 1. Be sure the power cord is plugged into a working outlet. 2. Check for any obstructions. If you find one, turn the heating unit OFF and unplug it. Wait at least 10 minutes to allow the heating unit to cool completely before removing any obstruction. When done, plug in the unit and follow the Operation Instructions. If your fireplace tips over: 1. Set the unit back in its upright position and check for any damage.
FIREPLACE OPERATION Plug your Infrared fireplace heater power cord into a 120V, 15 amp or 20 amp three bladed outlet. To Turn the Heater On: Press the Power button (1) on the control panel or on the remote control. Control Panel To Set the Temperature: Press the Up or Down button(2) on the control panel or on the remote control to the desired temperature. When desired temperature is reached, the heater will stop heating automatically.
