Product Specs
Table Of Contents
- BMS002 BT5.2 LE Audio Module
- RF/Analog
- • Frequency spectrum: 2.402 GHz to 2.480 GHz
- • Receive sensitivity: -95 dBm (2 Mbps EDR)
- • Output Power：8±2dBm (BDR) , 6±2dBm (EDR)
- 4±2dBm (BLE1M/2M)
- Audio Codec
- • SBC,AAC, LDAC
- • 24-bit digital-to-analog converter (DAC) with 10
- • 24-bit analog-to-digital converter (ADC) with 95
- • Supports up to 24-bit, 192 kHz I2S digital audio
- 1.DEVICE OVERVIEW
- 3.Power-on/off sequence
- 4. Battery charge specification revision 1.2 (BC1.2)
- 6.Module Description
- 8. Electrical Characteristics
- 9.Recommended Reflow Temperature Profile:
- 10.QR code label information:
- 11.Certification
- 12.Standard Packing Information
- 13.Document History
2.10 Additional testing, Part 15 Subpart B disclaimer
The grantee should include a statement that the modular transmitter is only FCC
authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant,
and that the host product manufacturer is responsible for compliance to any other
FCC rules that apply to the host not covered by the modular transmitter grant of
certification. If the grantee markets their product as being Part 15 Subpart B compliant
(when it also contains unintentional-radiator digital circuity), then the grantee shall
provide a notice stating that the final host product still requires Part 15 Subpart B
compliance testing with the modular transmitter installed.
Explanation: The module without unintentional-radiator digital circuity, so the module does not require
an evaluation by FCC Part 15 Subpart B. The host shoule be evaluated by the FCC Subpart B.