User's Manual

ManualsBrandsSunitec ManualsAudio EquipmentBluetooth Stereo Headset

Page 1 of 6

BS300 User Manual

About BS300

The Bluetooth Stereo headset BS300 use the newest Bluetooth technology, It works with all Bluetooth enabled

compatible phone or music device, that supports Advanced Audio Distribution Profile (A2DP) and Audio Video Remote

Control Profile (AVRCP), And integrated FM transmitter, So you can change the Audio to the Car Radio to other FM

radio, This product is very fashionable for using on different occasions, it gives you the sound quality you've never

experienced.

About Bluetooth Technology

Bluetooth wireless technology is set to revolutionize the personal connectivity. By providing freedom from wired

connections-enabling links and connectivity between mobile computers, mobile phones, portable handheld devices and

other Bluetooth enables devices within 10 meters. Utilizing global sound & digital data 2.4G ISM transmission, it

makes global communication in the way you've never dreamed of!

Getting to Know Your BS300

Getting Started

To use your BS300, please follow these simple steps:

(a) Charge your headset.

(b) Place your phones to the headset no more than 10 meters.

Talk & Standby Time

The fully charged battery offers up to 9-10 hours talk time，this could be varied because of power consumption of

different phones, and up to 200 hrs Standby time. When no calls are in progress, the headset remains turned on and

under standby mode.

Charging Your Headset

The BS300 comes with a built-in rechargeable battery. Prior to using the headset, it is recommendable to charge the

battery fully for the first time. Normal fully charge time is 2 hrs approximately.

IMPORTANT:

(a) Charging indication will be delayed for a few minutes if the headset has not been used for a long time or the

battery is drained.

(b) When battery becomes low, LED will flash red and headset will emit a beep every 2 minutes. Please recharge the

battery as described above. To prolong durability of battery, it’s recommended to charge the headset whenever low

battery is encountered. Under low battery condition, if headset is continuously used, it’ll decrease durability of battery,

as well as standby time, and cause longer charge time than normal 2 hrs.

Turning On/Off the Headset

Turning On: Headset under off mode:

(a) Press and hold the MFB for 3 seconds until you hear a short beep. The LED will flash blue 3 times.

(b)Headset will be under standby mode. The LED will flash blue every 3 seconds.

Turning Off: Headset under standby mode:

(a) Press and hold the MFB for 3 seconds until you hear a short beep. The LED will flash red 3 times.

(b) Headset will be off. The LED will flash stop.

IMPORTANT: Press the MFB again each time you turn on the Headset to reactive the paring so that the connection in

between the Headset and paired mobile handset is resumed. For pairing, please refer to procedures under “Pairing”.

Pairing

Summary of content (6 pages)

PAGE 1
BS300 User Manual About BS300 The Bluetooth Stereo headset BS300 use the newest Bluetooth technology, It works with all Bluetooth enabled compatible phone or music device, that supports Advanced Audio Distribution Profile (A2DP) and Audio Video Remote Control Profile (AVRCP), And integrated FM transmitter, So you can change the Audio to the Car Radio to other FM radio, This product is very fashionable for using on different occasions, it gives you the sound quality you've never experienced.
PAGE 2
Prior to using the BS300 for the first time, you must pair it with a Bluetooth-enabled mobile handset. The following steps describe pairing instruction for a typical Bluetooth-enabled mobile handset. (a) Place the BS300 and mobile handset no more than 1 meter apart. (b) Ensure the Headset is OFF. (c) Press and hold the MFB for 6 seconds until the Headset LED alternately flash red and blue. It’s now ready for pairing.
PAGE 3
5 6 7 8 9 10 11 12 13 IMPORTANT: Please make sure to record voice tag into the mobile handset before using voice dialing function. This function is only applicable to mobile handset with Bluetooth Hands-Free Profile. Functionality varies depending on the mobile handset models you have. Please refer to your mobile handset user guide for additional information. Last Number Re-Dialing: Under standby mode, double press MFB . The headset will connect to the handset for last number redial.
PAGE 4
Adjust the FM frequency If the earpiece not plug to the BS300,BS300 FM function will be on automatically when Bluetooth is on or Line in cable plugged For adjust the FM frequency, press the FM increase or FM decrease button. For better audio quality, please use the unused FM frequency.
PAGE 5
Safety Information: (a) Check local laws regarding use of a mobile handset and headset while driving. If you use the headset while diving, ensure your attention and focus remains on your responsibility of driving safety. (b) Never allow children to play with the headset. Small parts may be a choking hazard. (c) Observe all signs that require an electrical device or RF radio product to be switched off in the designated areas.
PAGE 6
FCC Radio Frequency Exposure statement: This product has been evaluated under FCC Bulletin OET 65C and found compliant to the requirement asset as set forth in CFR 47 section 1.1307(b), 2.1093 and 15.247(i) addressing RF Exposure from radio frequency device ,The redialed output power of this product is far below the FCC radio frequency exposure limits.