User`s manual

___________________________________________________________________________________
10
Hardware Installation
The hardware installation of Universal PCI Serial and Parallel Multi-IO
Communication Board is easy to carry out. Before inserting the card into the
PCI bus, please follow the detailed steps given below to install the PCI board in
your computer.
Step 1: Turn your PC’s power off, and shut off the power to any peripheral.
Step 2: Remove the power plug from the plug socket.
Step 3: Remove the cover from the computer case.
Step 4: If fitted. Remove the metal cover plate on the rear of a free PCI slot.
Step 5: Insert Universal PCI Multi-Port Communication Board into the free PCI
slot and screw it firmly on the bracket side.
Step 6: Place the cover back onto the computer.
Step 7: Insert the plug into the plug socket.
Safety First
To avoid damaging your system and boards, make sure your
PC’s power is turned off before installing PCI card.