Datasheet

___________________________________________________________________________________
25
4. How can I set the LPT port to the legacy 278 or 378 ISA address?
A: Because of PCI Express plug-n-play rule and windows operation system
limitation, you can NOT remap to 278H or 378H legacy ISA IO address
under Microsoft Windows 2000, XP, 2003 Vista, 2008, 7 or Linux OS.
5. How come my parallel device can not work on this Card, but work
properly under on-board LPT port??
A: a. Please confirms your parallel device connect to the LPT port correctly.
b. Make sure the LPT port number you connected matches with parallel
device settings.
c. Your parallel device only works under 278/378 legacy ISA IO address.
This card can not satisfy with this feature. Please contact with your
parallel device vendor for driver updating.
6. How can I set the different ECP / EPP / SPP / BPP operation mode?
A: Under Windows OS such as 2000, XP, Vista, and 7, PCI parallel card will
automatically communicate with the device to which it is connected and
sets to that particular mode. For example if this card is connected to a
printer that support SPP mode, then this parallel card will communicate with
this printer and will automatically set to SPP mode. It means that this card
will handshake with the device to which it is connected and configures to
that mode. User does not require changing to any particular mode. This
parallel card’s working mode can not force setting particular mode by driver
or BIOS!!
7. Does this board work under PCI Express x16 (lane) slot?
A: Yes, you can install this board under x1, x2, x4, x8, or x16 (lane) PCI
Express Bus connector keys.