Specification Sheet

Specifications
Hardware
USB Communication
Power
Driver Support
Environment
BUS
PCI Express Spec 1.1, Single-Lane (x1)
Controller
PCI Express USB2.0 Host controller
USB Standard
Enhanced Host Controller Interface (EHCI) and
Open Host Controller Interface (OHCI)
IRQ & IO
Assigned by System
Interface
Universal Serial Bus 2.0 / 1.1
Speed
High-Speed (HS), Full-Speed(FS) and Low-Speed(LS)
Data Transfer rate of 1.5, 12, and 480Mbps
No. of Port
2-port
PCB Receptacle
USB2.0 Type-A Female
Protection
±
15KV IEC61000-4-2 Air Gap Discharge
±
8KV IEC61000-4-2 Contact Discharge
Source
PCI Express Bus Power
Output Capacity
+5VDC / Maximum 1.0A / each port
Note: Total power output capacity will be limited by PC system power supply.
Over Current Protection
Standard USB2.0 Port:
+5VDC / 1.1A@5V PTC fuse / each port
Power Consumption 1.1W @ 3.3V (board only without power output to device)
Microsoft Client
XP / Vista / 7 / 8.x / 10 (X86/X64)
Microsoft Server
2000 / 2003 / 2008 / 2008R2 / 2012 (X86/X64)
Microsoft Embedded
XP Embedded / POS Ready 2009 / Embedded System
Linux
Linux 2.4.x / 2.6.x / 3.x
Apple MAC
MAC OS X 10.4 or later
Operation Temperature
0 to 60°C (32 to 140°F)
Operation Humidity
5 to 95% RH
Storage Temperature
-20 to 70°C (-4 to 158°F)