Instruction Manual

7
3. Slide the cord holder into position (Fig. 3).
4. Slide the trigger gun holder into position (Fig. 4).
5. Slide the spray wand protector into position (Fig. 5).
6. To connect the spray wand with the trigger gun, press
the wings of the spray wand into the slot of the trigger
gun, then twist counterclockwise until the 2 parts are
completely locked together (Fig. 6).
7. Connect the high-pressure hose to the trigger gun. Twist
to secure the connection (Fig. 7).
Fig. 2
High-pressure
hose holder
Fix with
4 screws
Fig. 3
Cord holder
R
Fig. 4
Trigger gun
holder
Fig. 5
Spray wand
protector
Trigger gun
Spray wand
Fig. 6
Spray wand wings
Fig. 7
High-pressure hose
Trigger gun