Assembly Instructions Item# D-GZ007PST 1/7
Parts List Parts Name No. Qty.
Hardware Pack 1 AA M6*20 Screw 56 PCS BB M6 Flat Washer 56 pcs Z1 M6 Wrench 1 PC Fig.1 Attach Screen (G) to Pole Fig.2 to Fig.3 Connect Bar Top (J) to Pole (H1, H2, H3, H4) by using Screw Pole(H1,H2,H3,H4)and by using (H3, H4) by using Screw (AA) and (AA) and Flat washer (BB) Screw(AA)and Flat washer(BB) Flat washer (BB).
Hardware Pack 2 BB M6 Flat Washer 16pcs CC M6 Nut 8PCS DD M6*45 Screw 8pcs Z2 M6 Wrench Fig.4 Screw Hook (B) into Large Top Connector (D), then insert Top Bar 2(F) into Large Top Connector (D). Fig.7 Connect Top Bar 1(E) and Pole (H1/H2/H3/H4) by using Screw (DD) Washer (BB) and Nut (CC), and Put Big Canopy (K) onto the big 1 PCS Fig.5 Connect Top Bar 2(F) and Pole (H1/H2/H3/H4) by using Screw (DD), Flat Washer (BB) Fig.6 Insert Top Bar 1(E) into Large Top Connector (D). and Nut (CC). Fig.
Hardware Pack 3 EE Dia.6x180 Stake 16PCS Fig.10 Lay out Small Canopy (L) Fig.11 Lay out Big Canopy (K) Fig.12 Secure the whole gazebo completely and tie it to Small Top completely, and then tie it to Top to the ground with Dia.6x180 Bar(C). Bar (E/F). Stake (EE).
IMPORTANT: 1. Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of gazebo construction. 2. The area for assembly should not be less than 6 feet from any obstruction such as fence, garage, house, overhanging branches, laundry line or electrical wires. 3. This unit is heavy. Do not assemble this item alone. Six people are recommended for safe assembly. 4. Some parts may contain sharp edges. Wear protective gloves if necessary during assembly.
Maintenance: Our iron/steel components for garden accessories and patio items are coated with rust inhibiting paint that protects it from rusting. However, due to the nature of iron, surface oxidation (rusting) will occur once these protective coatings are scratched. This is a natural process and is not a defect! To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint.
