Assembly Instructions Item#:D-GZ941PST 1/8
Preparation: Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble the product. Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start to finish. The final product will be a quality piece that will go together smoothly and give years of enjoyment. Important: 1. Keep all children and pets away from assembly area.
Parts List Small top connector A 1 Slanting bar of small top B 4 Large top connector C 1 Middle beam D 4 Slanting bar E 4 Middle beam connector F 4 Slanting bar connector G 4 Base cover H 4 Post I 4 Long beam J 4 Short beam K 4 Lower slanting bar L 4 Lower middle beam M 4 Decorative plate N 4 Baffle P 4 Q 8 R 1 Mosquito netting bar Hook 3/8
Small canopy U 1 Largo canopy1 S 1 Largo canopy 2 T 1 Hardware Pack 1 AA M6*20 Bolt 88 PCS BB M6 Washer 88 PCS CC M6 Nut 8PCS W M6 Wrench 2 PC 4/8
Fig.1: Put the base cover(H)on the lower end of Post(I)then fix them by using Bolt (AA) and Washer (BB). Fig.2:Assemble the Long beam (J) and Short beam(K) by using Bolt (AA) , Washer(BB) and Nut(CC). Fig.3:Attach the Middle beam connector (F) to the assembled beam J&K by using Bolt(AA)and Washer (BB). Fig.4:Attach the Decorative plate(N)to the assembled beam J&K by using Bolt(AA)and Washer(BB). Fig.5: Attach the Slanting bar connector (G) to the Post (I) by using Bolt (AA) and Washer (BB). Fig.
Fig.9: Insert the Slanting bar (E) into the Lower slanting bar(L). Fig.10: Insert the upper end of the Slanting bar (E) into the tube of Large top connector, meanwhile screw the Hook(R)into the Large top connector(C). Fig.11:Attach the lower slanting bar(L)into the slanting bar connector (G) by using Bolt(HH), Washer(BB)and Nut(CC). Fig.12: Insert the Middle beam (D) into the Lower middle beam(M). Fig.13: Insert the Middle beam (D) into the tube of Large top connector(C). Fig.
Hardware Pack 3 EE Φ8*180 Stake 16 PCS Fig.13 :Spread the Large canopy (T),and secure it on four corners of Slanting bar (L). Fig.14: Fix the gazebo on the ground by using Stake(EE). Limited Warranty: This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item provided the item is maintained with care and used only for personal, residential purposes.
warranted to be free from defects in material or workmanship for a period of one 6 months. We don't reimburse for transportation or delivery costs, or compensate the individual or any outside party for assembling or disassembling the product. Exclusions: Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered.