Replacement Part List

Fig.18 Insert the awning frame part into the Awning (R) as the pic. shows, and use velcro to fasten the
Vertical Pipe ((O4, O5) on the Awning (R). The outside Horizontal Pipe (O2
O3) and Support Pipe (O6)
also use velcro to fasten to Awning (R),but the inside Horizontal Pipe (O2,O3) insert to Awning (R).
Fig.18-1: Insert the Horizontal Pipe 2 (O3) into the Horizontal Pipe 1 (O2), then use Bolt (CC) and Washer
(
BB
)
to fasten it.