Installation Guide

ManualsBrandsSunjoy ManualsGazebosMadison 12 ft. x 10 ft. Black Steel Gazebo

Assembly Instructions

Item# D-GZ841PST-C (PC Top)

Congratulations on your purchase of our SUNJOY 12’x10’ Hardtop Gazebo. Our clear, easy to

follow, step-by-step instructions will guide you through the assembly process from start to

finish.

● This unit is heavy. Do not assemble this item alone. 6-8 people are recommended for safe

assembly.

WARNING:

● Keep all children and pets away from assembly area. Children and pets should be supervised

when they are in the area of the Gazebo construction.

● Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house,

overhanging branches, laundry line or electrical wires.

● Some parts may contain sharp edges. When assembling and using this product, basic safety

precautions should always be followed to reduce the risk of personal injury and damage to the

product. Please read all instructions before assembly and use.

● Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.

● Assemble on level ground

IMPORTANT

Please do not return this product to the store. For technical assistance on assembly or replacement

parts. Please call Sunjoy Industries at 1-866-578-6569 from 8:00 am EST to 8:00 pm PST or fax the

replacement part form which is in the box to 1-740-283-3549 or Email customer.care@sunjoygroup.com

for assistance.

Summary of content (11 pages)

PAGE 1
Assembly Instructions Item# D-GZ841PST-C (PC Top) Congratulations on your purchase of our SUNJOY 12’x10’ Hardtop Gazebo. Our clear, easy to follow, step-by-step instructions will guide you through the assembly process from start to finish. WARNING: ● This unit is heavy. Do not assemble this item alone. 6-8 people are recommended for safe assembly. ● Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the Gazebo construction.
PAGE 2
Parts List Big panel 1 A1 2 Big panel 2 A2 2 Small panel 1 B1 2 Small panel 2 B2 2 Fence C 8 Connector D 4 Top connector E 4 Lower connector F 4 Short beam1 G1 2 Short beam2 G2 2 Long beam1 G3 2 Long beam2 G4 2 Long top bar I1 2 Corner frame I2 2 Oblique beam J 4 Middle beam 1 K1 2 Middle beam 2 K2 2 PC piece 1 M1 4 PC piece 2 M2 4 PC piece 3 M3 4 PC piece 4 M4 4 PC piece 5 M5 4 PC piece 6 M6 2 PC piece 7 M7 2
PAGE 3
Big left cover N1 4 Big right cover N2 4 Middle cover N3 2 Small cover 1 Small cover 2 O1 O2 2 2 Left rail P1 4 Right rail P2 4 Middle rail P3 2 Center plate Q1 6 Corner plate Q2 8 Hook R 1 Small top connector S 1 Cover T 1 Small slanted beam U 4 Panel wall W 8 Long netting bar 1 W1 2 Long netting bar 2 W2 2 Short netting bar 1 W3 2 Short netting bar 2 W4 2 Cover flap 1 X1 2 Cover flap 2 X2 4 Cover flap 3 X3 4
PAGE 4
Hardware Pack 1 BB M6 Flat washer 124 PCS DD Nut 16PCS FF M6X15 Bolt 64 PCS GG M6X70 Bolt 16 PCS LL M6X35 Bolt 16 PCS HH M6X25 Bolt 12 PCS Z M6 Wrench 2 PCS Fig.1: Secure the fence (C) to the Fig.2: Connect big panel 1 (A1) and small panel 1 (B1) by using panels (A1/A2/B1/B2) by using bolts bolts (JJ), flat washers (BB), repeat this for big panel 2 (A2) and (FF) and flat washers (BB). small panel 2 (B2).
PAGE 5
Fig.3: Fix top connector (E) and Fig.4: Attach assembly beams lower connector (F) onto short (G1/G2) to big panel 1 / big panel 2 / beam / long beam (G1/G3) by small panel 1 / small panel 2 (A1/A2 using bolts (GG), flat washers /B1/B2) by using flat washers (BB), bolts (FF) and bolt (LL) separately. Hardware Pack 2 AA M6X15 Screw 24 PCS BB M6 Flat washer 80 PCS FF M6X15 Bolt 4 PCS DD Nut 16 PCS EE M6X20 Bolt 20 PCS JJ M6X60 Screw 16 PCS Fig.
PAGE 6
Fig.6: Insert long top bar (I1) into corner frame (I2) and fix them by using bolts (AA) and flat washers (BB). Fig.7: Fix oblique beam (J) Fig.8:Connect cover flap 3 (X3) Fig.9: Attach middle beam 1 Fig.
PAGE 7
Hardware Pack 3 AA M6X15 Screw 14 PCS BB M6 Flat washer 16 PCS HH M6X60 Bolt 2 PCS piece Fig.17: Insert the Small cover (O1 and O2) Fig.18: Secure the cover (T) to the (M6/M7) into the rail on the small into the lower of the PC piece 6/7 (M6 and small top connector (S) with bolts slanted beam (U). M7), then secure the corner plate (Q2) to (HH) and flat washers (BB) Fig.16: Insert the PC the small slanted beam (U) through three holes with screws (AA) and flat washers (BB). Fig.
PAGE 8
Hardware Pack 4 KK Φ6X260 Stake 16 PCS Fig.23: Assemble the panel Wall Fig.24: Secure the whole gazebo (W) by using velcro straps. to the ground with stakes (KK).
PAGE 9
1. Keep all children and pets away from assembly area. Children and pets should be supervised while gazebo is being assembled. 2. The assembled gazebo should be located at least 6 feet (2 m) from any obstruction such as a fence, garage, and house, overhanging branches, laundry lines or electrical wires. 3. This unit is heavy. Do not assemble this item alone. Six people are recommended for safe assembly. 4. Some parts may contain sharp edges. Wear protective gloves if necessary during assembly. 5.
PAGE 10
Our iron/steel components for garden accessories and patio items are coated with rust inhibiting paint that protects it from rusting. However, due to the nature of iron, surface oxidation (rusting) will occur once these protective coatings are scratched. This is a natural process and is not a defect! To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint.
PAGE 11
GAZEBO NETTING AND CURTAIN ASSEMBLY INSTRUCTIONS Netting or Curatin is available separatley Ring 104PCS Fig.1: Hang the mosquito net and curtain onto the netting tubes (W1, W2, W3 and W4) by using rings, please put the mosquito net inside.