Installation Guide

Hardware Pack 3
BB M6 Flat washer 78 PCS
CC M6*20 Bolt 66 PCS
KK M6*45 Bolt 12 PCS
Fig. 8: Attach the small roof cladding (N) to the small roof bar (M) tighten with screw (GG) and flat washer (BB).
Fig. 9: Attach the small roof trim cap (O) to the small roof bar (M) tighten with screw (DD) and flat washer (BB).
Fig.10: Attach the second roof cover (Q) to the small roof using rounded nut (HH) and flat washer (II). Tighten the nut
using the M10 wrench (Z2).