Installation Guide

ManualsBrandsSunjoy ManualsGazebosOttawa 13.7 ft. x 12 ft. Faux Copper Steel Gazebo

Assembly Instruction

NS#:110102017/110102021

Item#:D-GZ842PST-AS-135 (Black Top) / D-GZ842PST-AS-235 (Faux

Copper Top)

Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start

to finish. The final product will be a quality piece that will go together smoothly and give years

of enjoyment. All you will need is a screwdriver, a hammer and

two

ladders (not included)

whose height is no less than 2.5m.

Note: THIS UNIT IS HEAV Y!

Do NOT assemble this item alone for safety. Six people are necessary.

Item Identification: For ease of identification, all parts are labeled to correspond to the Step

number in which the part is used.

Summary of content (11 pages)

PAGE 1
Assembly Instruction NS#:110102017/110102021 Item#:D-GZ842PST-AS-135 (Black Top) / D-GZ842PST-AS-235 (Faux Copper Top) Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start to finish. The final product will be a quality piece that will go t oget her smoothly and give years of enjoyment. All you will need is a screwdriver, a hammer and two ladders (not included) whos e height is no less than 2.5m.
PAGE 2
Parts List Gutter A 6 Corner cover A1 6 Beam connector B 6 Arc support tube C 6 Post 1 D1 3 Post 2 D2 3 Baffle E 6 Cent re hook F 1 Screen 1 G1 1 Screen 2 G2 2 Small beam 1 H1 6 Small beam 2 H2 6 Small beam 3 H3 6 Small beam 4 H4 6 Big roof cladding 1 I1 6 Big roof cladding 2 I2 6 Big roof cladding 3 I3 6 Big roof trim cap J 6 Big roof beam K 6
PAGE 3
Roof connection L 1 Small roof bar M 6 Small roof cladding N 6 Small roof trim cap O 6 P 1 Second roof cover Q 1 Flower basket R 2 Basket side frame S 4 Slate top T 1 Slate top support U 2 Right -angle support V 2 Curt ain tube W 6 Gutter connector X 6 Second roof top connector Hardware Pack 1 AA M6 x 35 Bolt 6 PCS BB M6 Flat washer 48 PCS CC M6 x 20 Blot 42 PCS Z1 M6 Wrench 2 PCS
PAGE 4
Fig.1: Insert gutter connector (X) to gutters (A) and tighten with flat was her (BB) and bolt (CC) as showed in Fig.1. Fig.1-1: Attach the corner cover (A 1) to the gutter connector (X) with bolt (AA) and flat washer (BB). Fig.2: Connect the beam connector (B) to the gutter (A) with bolt (CC) and flat washer (BB ). Fig.2-1: Attach the curtain tube (W) to the gutter (A) using bolt (CC) and flat washer (BB ).
PAGE 5
Fi g. 4 L B B C B K C C B C Fig. 3: Connect the bottom of the big roof beam (K) and the beam connector (B) using screw (DD), flat washer (BB) and nut (FF). Fig. 4: Connect the top of the big roof beam (K) with roof connection (L) using bolt (CC) and flat washer (BB ). Fig. 5: Connect the small beam 1 (H1), small beam 2 (H2), small beam 3 (H3) and small beam 4 (H4) to the big roof beam (K) from top to bottom using screw (GG) and flat washer (BB). Fig. P P Fi 6-1 g. 7 M L B F Fig.
PAGE 6
Fig. 8: Attach the small roof cladding (N) to the small roof bar (M) tighten with screw (GG) and flat washer (BB). Fig. 9: Attach the small roof trim cap (O) to the small roof bar (M) tighten with screw (DD) and flat washer (BB). Fig.10: Attach the second roof cover (Q) to t he small roof using rounded nut (HH) and flat washer (II). Tighten the nut using the M10 wrenc h (Z2).
PAGE 7
Fig.11: Attach the post 1 (D1) and post2 (D2) to the gutter (A) using bolt (CC) and flat washer (BB). Fig.12: Attach the baffle (E) to the gutter (A ) using bolt (CC) and flat washer (BB). This step requires 4 people. Fig.13: Attach the screens (G1, G2) bet ween post (D1) and post (D2), tighten with bolt (KK) and flat washer (BB). Fig. 14: Insert the opposite ends of the arc support tube (C) into the respective posts (D1, D2) and secure the arc support tube with bolt (CC) and flat washer (BB). Fig.
PAGE 8
G BG B I 1 I G BG B 2 I G B G B Fig.16: Place the big roof cladding (I1, I2, I3) over the big roof structure 3 Fig . 17 D BD J D BD B and tighten the claddings to the big roof beam (K ) using screw (GG) and flat washer (BB). Fig.17: Attach the big roof trim cap (J) to the big roof beam (K) using screw (DD) and flat washer (BB). B Fig.
PAGE 9
Fig. 18: Attach the basket side frames (S) to flower basket (R) and tighten with bolt (NN) and flat was her (BB). Fig. 19: Attach the assembled flower basket to screen 2 (G2). Fig. 20: Connect slate top support (U) post (D1) and slate top (T) using bolt (EE) and flat was her (BB). Fig. 21: Connect the right-angle support (V) to screen 1 (G1) and slate top (T) using bolt (EE) and flat washer (BB). Fig. 22: Fix the assembled gazebo to the ground firmly using lawn stakes (MM). IMPORTANT: 1.
PAGE 10
ground stakes, in areas subject to frequent severe weather, securing the gazebo t o a deck, concrete patio or footings should be considered. 10. Your gaz ebo has been engineered to accommodat e winter snow loads incurred in most areas. Removal of accumulat ed snow on the gazebo roof with a roof rake is recommended. In areas that are regularly subject to blizzard conditions however, removal of the roof panel is suggested. The assembled roof structure c an simply be left intact until warmer conditions return.
PAGE 11
Made in China GAZEBO NETTING AND CURTAIN ASSEMBLY INSTRUCTIONS Netting / Curatin is available separately Hardware Pack LL Hook 96 pcs Fig. 1: Take off one end plug of curtain tube (W), insert hook (LL) int o sliding chute, then cover sliding chute. Fig. 2: Attach curtain(Y) and Mos quito netting (Z) to curtain tube (W) with hook (LL).