Installation Guide

Hardware Pack 2
BB Flat Washer M6 60 PCS
DD Bolt M6X55 12 PCS
EE Nut M6 12 PCS
KK Bolt M6X15 48 PCS
Fig.1: Insert Decorative Gutter (1A) into Decorative Gutter (1B), tighten with Bolt (KK) and Flat Washer BB. (Fig.1)
Note: Do not tighten the other side.
Fig.2: Insert 1 of the rest Decorative Gutter (1A) into baffle on assembled Decorative Gutter (1B), tighten with Bolt
(LL) and Flat Washer (BB) .(Fig. 2).
Fig.3: Lock Middle Beam Bottom Connector (1C) and Curtain Connector (T1) to the middle neck of Decorative
Gutter (1A) into Decorative Gutter (1B) by using Bolt (CC) and Flat Washer (BB).
Fig.3-1: Lock Oblique Beam Bottom Connector (1D) to Decorative Gutter (1A) into Decorative Gutter (1B) by using
Bolt (KK) and Flat Washer (BB).
KK Bolt M6X15 20 PCS
LL Bolt M6X35 8 PCS
WW Wrench 2 PCS