Installation Guide

13
Fig.19-2: Pull out Short netting
bar (T1) and Long netting bar
(T2) from Connector (S1/S2).
Fig.20: Hang the five rings of curtain into
Short netting bar (T1) from right side,
then insert Short netting bar (T1) into Right
connector (S2).
Fig.19-1: Raise Connector
(S2/S1) and take them down.
Fig.21: Hang the other rings
of curtain into adjacent Short
netting bar (T1) from left side,
insert Short netting bar (T1)
into Left connector (S1).
F
ig.22: Attach assembled
Connector (S2/S1) to two sides
of Baffle (D3) respectively.
Fig.23: Hang the five rings of Mosquito
netting into Long netting bar (T2) from
right side, then insert Long netting bar
(T2) into Right connector (S2).
Fig.24: Hang the other rings of
Mosquito netting into adjacent
Long netting bar (T2) from left
side, insert Long netting bar (T2)
into Left connector (S1).
Fig.25
: Attach assembled
Connector (S2/S1) to two sides
of Baffle (D3) respectively.