Assembly Instructions Item# D-GZ848PAL-AS-134 Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start to finish. The final product will be a quality piece that will go together smoothly and give years of enjoyment. All you will need is a screwdriver, a hammer and two ladders (not included) whose height is no less than 2.5m. Note: THIS UNIT IS HEAVY! Do NOT assemble this item alone for safety. Six people are necessary.
Parts List 1A (X2) 1C (X2) 1E (x4) Long side decorative beam 1 Short side decorative beam 1 Middle beam connector 1B (X2) 1D (X2) Long side decorative beam 2 Short side decorative beam 2 1F (x4) Corner connector 2A (x4) Top slanting bar 2B (x4) Middle beam 2C (x4) Short beam 1 2L (x4) Short beam 2 2D (x2) 2F (x4) 2H(x4) 2J (x4) 3A(X4) Right support beam of long side 1 Right support beam of long side 3 Left support beam of long side 2 Right support beam of short side 2 Slanting bar of small to
4K (x2) 4L(x4) 5A(x2) Arc support bar of short side1 Screen 4P (x2) 4M(X4) Left roof cover of long side 1 5B(x2) Arc support bar of short side2 Block plate Right roof cover of long side 1 5C(x4) Left roof cover 1 5D(x4) Right roof cover 1 5E (x4) Left roof cover 2 5F (x4) Right roof cover 2 Middle roof cover 5H(X14 5G (x2) 5I(X8) 5K(X4) of short side Short press plate Bottom cover of slanting bar ) 5J(X4) Long press plate Top cover of slanting bar R1(X4) Curtain tube connecter 1 R2(X4
Fig.1:Insert decorative beam 1A(1C)to decorative beam 1B(1D), tighten with bolt (AA) & flat washer (BB). Fig.2:Attach assembled beams to another respectively and tighten with bolt (CC) & flat washer (BB). Fig.3:Fix the Middle beam connecter (1E) and curtain tube connecter 1(R1) on the middle of decorative beams by using bolt (AA) & flat washer (BB) Fig.4:Fix the Corner connector (1F) on the corner of the decorative beam with bolt (AA) & flat washer (BB).
Fig.9: Connect Short beam (2L/2C),Top slanting bar (2A) and Short beam 1 (2C) by using bolt ( EE), washer (BB) and nut (FF). Fig.10: Attach short beam (2C/2L) to decorative beam by using bolt (AA) and washer (BB). Fig.11: Connect Left support beam (2G/2K) and Right support beam(2D/2I) to middle beam(2B) by using bolt (EE), washer (BB) and nut (FF).
Fig.15: Attach slanting bar of small top (3A) to top frame (3E) by using bolt (DD) and washer (BB). Fig.16: Attach pothook (3K) to small connector (3C). Fig.17: Connect slanting bar of small top (3A) and small top connector (3C) by using bolt (EE), washer (BB) and nut (FF). Fig.18: Attach long support bar of small top (3F) and short support bar of small top (3G) to top frame (3E) by using bolt (AA) and washer (BB). 图示显示 3G 和 3F 连在 3A 上,而不是 3E 上。 Fig.
Hardware Pack 4 BB M6 Flat washer 164PCS DD M6*15 Bolt 40 PCS II M6*20 Bolt 100 PCS JJ M6*25 Bolt 24 PCS KK Ф8*180 Peg 32 PCS Fig.21: Lift the big base protector (4A), attach the big post base (4C) to the big post (4G1/G2) with bolt (DD) & washer (BB). Fig.22: Lift the small base protector (4B), attach the small post base (4D) to the small post (4H) with bolt (DD) & washer (BB). Fig.23: Fix big top block (4E) to big post (4G1 & 4G2) with bolt (II) and washer (BB). Fig.
Fig.25: Lift assembled gazebo roof frame and fix big top block (4E) to the corner of decorative beam with bolt (II) and washer (BB). Fig.26: Fix small top block (4F) to decorative beam (1A/1B) with bolt (II) and washer (BB). Fig.27: Attach the top of screen (4L) to big post (4G1/4G2) and small post (4H1/4H2) with bolt (II) and flat washer (BB) Fig.28: Attach the bottom of screen (4L) to big post (4G1/4G2) and small post (4H1/4H2) with bolt (II) and flat washer (BB) Fig.
Hardware Pack 5 AA M6*15 Bolt 52 PCS BB M6 Flat 76 PCS DD M6*15 Bolt 16 PCS HH M6*35 Bolt 8 PCS Fig.35: Insert left roof cover of long side (5A) to the block of the bigger top frame, then insert right roof cover of long side (5B) to the block of the bigger top frame and press onto 5A. Fig.36:Fix roof cover of short side (5G) and left roof cover of long side (5A) to top slanting bar (2A) with bolt (AA) and washer (BB).
Fig.37: Fix roof cover (5C, 5D, 5E and 5F) to top slanting bar (2A) with bolt (DD) and washer (BB). Fig.38: Fix press plate 5H (5I) to decorative beam with bolt (AA) and washer (BB). Fig.39: Insert top cover of slanting bar (5J) into the connect hole of the top frame (3E). Fig.40: Fix top cover of slanting bar (5J) with bolt (HH) and washer (BB), please do not tighten here, insert bottom cover of slanting bar (5K) under top cover of slanting bar (5J), fix them with bolt (HH) and washer (BB).
Exclusions: Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof of purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is non-transferable.
GAZEBO NETTING AND CURTAIN ASSEMBLY INSTRUCTIONS Netting / Curatin is available separately Fig.1: Insert the end of curtain tube which has snap hook. And remove the curtain tube (S1/S2) from curtain tube connecter (R1) as showed in the picture. Fig.2:Pull out the of curtain tube (S1/S2) which you insert to the from curtain tube connecter (R3) Fig.3:Slip the curtain (U) over the curtain tube of long side (S1).
Fig.4: Slip the rest 5 brass buckles on the curtain over curtain tube (S2) and fold the curtain as showed in the picture. Fig.5: Uplift the curtain tube assembled with curtain (U) and insert on end of curtain tube to curtain tube connector. (Please note that you must plug the curtain tube in the end of the connector so that you can assemble other end of curtain tube easily) Fig.